Cotech DL25Q-W009A0-127 Bedienungsanleitung

Lies die bedienungsanleitung für Cotech DL25Q-W009A0-127 (5 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu Cotech DL25Q-W009A0-127 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Ver. 20181126

LED Downlight

Art.no 36-7547 Model DL25Q-W009A0-127

36-7794 DL25Q-W009A0-027

Please read theentire instruction manual before using theproduct

and save it for future reference. We reserve theright for any

errors in text or images and any necessary changes made to

technical data. If you have any questions regarding technical

problems please contact our Customer Services.

Safety

• Theproduct is intended for indoor use only (IP44).

• Installation and maintenance may only be carried out by

aqualified tradesman according to local safety regulations.

• Thelight fitting must not be used if any part is damaged.

It should either be discarded or repaired by aqualified

technician.

• None of theproduct’s parts are to be disassembled or modified.

3. Unscrew theterminal block cover.

4. Hold down thecable holder on theterminal block and insert

theends of thewires. Pull gently on thepower lead to make

sure that thewires are firmly secured in theterminal block.

5. Screw theterminal block cover back on. Thecover also

functions as astrain relief.

6. Lift thespring clips up and mount thelight in a68−73 mm hole.

Responsible disposal

• Do not cover thedownlight with anything

that will hinder ventilation such as foil,

paper or plastic.

• Make sure that thewires do not rub against sharp corners

or edges.

• Therating label containing thetype designation must not be

removed or made illegible.

• Theproduct must only be connected to a230 V AC

power supply.

Installation/mounting

Mounts in a68−73 mm diameter hole. Mounting depth: 70 mm.

Plan thelayout of thepower lead before you begin installation.

No minimum clearance from combustible surfaces is required

for LED bulbs.

1. Turn off thepower.

2. Strip theends of thewires as shown in thediagram.

Dimmable

This downlight can be dimmed using anLED

dimmer but works with most older, traditional

incandescent bulb dimmers and dimmers

designed for electronic transformers. For best

performance thedimmer might need adjusting

with theMax/Min screw.

This symbol indicates that this product should not

be disposed of with general household waste.

This applies throughout theentire EU. In order to

prevent any harm to theenvironment or health

hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so that

thematerial can be disposed of in aresponsible

manner. When recycling your product, take it to

your local collection facility or contact theplace

of purchase. They will ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

Power supply200–240 V AC, 50 Hz

Power9 W

Protection classIP44

IP20

Light sourceWarm white LEDs (2,700 K), 540 lm

Beam angle38°

SizeMounting hole diam: 68−73 mm

Outer ring diam: 86 mm

Mounting depth: 70 mm

UNITED KINGDOM • CUSTOMER SERVICEtel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk

postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

70 mm

60 mm

Ø 86 mm

Ø 65 mm

15 mm8−10 mm

Produktspezifikationen