Craftmade Coupler Bedienungsanleitung
Seiten 1 Ventilator
Lies die Bedienungsanleitung für Craftmade Coupler kostenlos online oder lade das PDF herunter. 14 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
INSTALLATION INSTRUCTIONS
I. SAFETY PRECAUTIONS
A. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE ASSEMBLING AND
INSTALLING THE COUPLER. SAVE THESE INSTRUCTIONS.
B. DANGER: HIGH VOLTAGE! Household electrical power can cause serious injury or death.
Disconnect source of electrical power to the ceiling fan by removing fuse or switching off circuit breaker.
II. PREPARATION
A. If attaching new downrod to downrod on
existing ceiling fan, disconnect source of electrical
power to the ceiling fan by removing fuse or
switching off circuit breaker. (See Fig. 1.)
WARNING:Failure to disconnect power supply prior
to installation may result in serious injury.
B. Lower canopy from the hanging bracket. (See Fig. 2
for example.)
C. Disconnect existing wiring between ceiling fan and
supply at outlet box. Remove hanging ball from
hanging bracket and lower ceiling fan. (See Fig. 3 for
example.)
D. Remove original downrod from top of motor
housing. Pull all wires through original downrod so
downrod is free of all wiring.
III. COUPLER ASSEMBLY
A. Loosen set screws on coupler. (See Fig. 4.)
IMPORTANT: Set screws (on coupler) must be loosened
to prevent scratching downrod(s).
B. Take threaded end of original downrod and thread
into coupler until holes in downrod align with holes
in coupler. Locate the bigger of the two holes at that
end of the coupler and then insert one of the Allen
screws provided into the bigger (non-threaded) hole.
Push Allen screw through coupler into threaded hole on
the opposite side and tighten completely. (See Fig. 5.)
C. Insert non-threaded end of new downrod into other
end of coupler by twisting and turning until holes in
downrod and coupler align. Insert the other Allen
screw provided through the bigger (non-threaded)
hole and then push Allen screw through to threaded
hole on the opposite side. Tighten Allen screw
completely. (See Fig. 6.)
D. Now, tighten both set screws on the coupler securely
(See Fig. 7.)
WARNING:Failure to tighten set screws (on coupler)
completely could result in the fan becoming loose and
possibly falling.
E. Thread safety cable and electrical wires through,
starting at the threaded end of the new downrod
and pull extra wire slack from the upper end of the
original downrod.
F. Raise ceiling fan to hanging bracket and re-install the
canopy. Tighten all applicable screws securely.
MODEL: COUPLER
Fig. 1
Fig. 4
Fig. 5
Fig. 2Fig. 3
set screws
Allen wrench
Allen wrench
Allen wrench
Allen screw
Allen screw
coupler
coupler
(original)
downrod
downrod
CRAFTMADE
COPPELL, TX 75019
FOR CUSTOMER SERVICE, CALL: 1-800-486-4892
ON
OFF
ON
OFF
Fig. 6
Fig. 7
set screws
Allen wrench
canopy
hanging
bracket
(original) downrod
(new) downrod
coupler
Produktspezifikationen
| Marke: | Craftmade |
| Kategorie: | Ventilator |
| Modell: | Coupler |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Craftmade Coupler benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ventilator Craftmade
Craftmade Sterling STL60 Bedienungsanleitung Craftmade Cole CLE52 Bedienungsanleitung Craftmade Santori SNT60 Bedienungsanleitung Craftmade Wheeler WHL42 Bedienungsanleitung Craftmade Santori SNT72 Bedienungsanleitung Craftmade Nitro NTO54 Bedienungsanleitung Craftmade Bellows I BW116 Bedienungsanleitung Craftmade Eos ECF52 Bedienungsanleitung
Alle Craftmade Ventilator Bedienungsanleitungen
Beliebt in Ventilator
Craftmade THO42 Bedienungsanleitung Craftmade PRT102 Bedienungsanleitung Craftmade BW248AG6 Bedienungsanleitung
Bedienungsanleitung Ventilator
Neueste Bedienungsanleitungen für Ventilator
Progress Lighting P250117 Bedienungsanleitung Progress Lighting AirPro P2600 Bedienungsanleitung Progress Lighting AirPro P2611 Bedienungsanleitung Progress Lighting AirPro P2610 Bedienungsanleitung Domo DO1201V Bedienungsanleitung Uline H-6439 Bedienungsanleitung Uline H-1408 Bedienungsanleitung Tolsen 79599 Bedienungsanleitung Renzor AEB Bedienungsanleitung Uline H-9345 Bedienungsanleitung