Creality Ender-3 Pro Bedienungsanleitung
Creality
3D-Drucker
Ender-3 Pro
Lies die bedienungsanleitung für Creality Ender-3 Pro (12 Seiten) kostenlos online; sie gehört zur Kategorie 3D-Drucker. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Creality Ender-3 Pro oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
V.2.2
Ender-3 Pro Series 3D Printer
[To make Top-quality 3D printer]
To be the Chief Evangelist
◆This guide is for the Ender-3 Pro Series of 3D printers.
◆Select the correct input voltage to match your local mains
(230V or 115V)
◆Because of software/hardware upgrades and model
differences, new revisions may not be listed in this guide.
◆Please plug the power cord into a three−hole power jack.
◆Detailed instructions for use are available in the TF card.
Guide Book
Notes
1. Do not use the Printer in any way other than described herein to avoid personal injury or property
damage.
2. Do not place the Printer near flammables, explosives or heat sources. It is best to place it in a
well- ventilated, low-dust environment.
3. Do not expose the Printer to violent vibration or any unstable environment. This will cause poor
print quality.
4. The filaments recommended by the manufacturer are preferred as to avoid clogging in the hot end
and/or Printer damage.
5. Do not use any other power cable than the one supplied. Use a grounded three-prong power outlet.
6. Do not touch the nozzle or hot bed during printing. Keep hands away from machine while in use to
avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the Printer. These loose articles can become
caught in moving parts and cause personal injury or Printer damage.
8. Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not
touch the nozzle directly. This can cause personal injury.
9. Clean the Printer frequently. With the machine powered off, clean the printer body with a dry cloth
to remove dust, adhered printing materials and foreign objects on guide rails. Use glass cleaner or
isopropyl Alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the Printer without supervision.
Preface
1. Introduction ...………………………............1
2. Screen Information........……………….........2
3. Loading Filament......................................3
4. Bed Le v el l in g .. . .. . .. . . . . . . . . . . . . . . . . . . . . . . . 4
Contents
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our 3D team is always
ready to provide you with assistance. Please contact us via the phone number or e-mail address provided at the end when you encounter any
problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanied instructions and videos in the TF card.
2.Visit our official website www.creality3d.cn You will find relevant software/hardware information, contact details and operation and
maintenance instructions on the website.
5. Software Instal lation ..………………5
6. Preparing to Print……………………..6
7. Trouble-shooting ……………………..7
Produktspezifikationen
| Marke: | Creality |
| Kategorie: | 3D-Drucker |
| Modell: | Ender-3 Pro |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Creality Ender-3 Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung 3D-Drucker Creality
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
Bedienungsanleitung 3D-Drucker
- Dimension
- Weller
- Sindoh
- Anycubic
- XYZprinting
- Leap Frog
- CraftBot
- Snapmaker
- Exibel
- Anker
- AnkerMake
- Festo
- Artillery
- Polaroid
- Bq
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
29 Juli 2025
25 November 2024
25 November 2024
24 November 2024
24 November 2024
24 November 2024
16 November 2024
27 September 2024
5 September 2024