Crestron CAEN-UMP1X2 Bedienungsanleitung
Crestron
Nicht kategorisiert
CAEN-UMP1X2
Lies die bedienungsanleitung für Crestron CAEN-UMP1X2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Crestron CAEN-UMP1X2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
CAEN-UMP – Universal Mounting Plates
Introduction
Crestron Universal Mounting Plates (CAEN-UMP Series)
are a complete line of accessory plates, which allow
mounting of non-Crestron equipment to any Crestron
Automation Enclosure (CAEN-Series). Third-party
products such as phone and alarm systems can be
mounted to these plates within an enclosure. The
advantage to using the CAEN-UMP is that a variety of
sizes are available and each plate occupies the same area
as one, two or four Crestron lighting modules (CLX-
Series). The size corresponds to the number of module
spaces and their arrangement within the enclosure. For
example, CAEN-UMP2x2 occupies four module positions
and CAEN-UMP1x1 occupies one module position. The
others (CAEN-UMP2x1 and 1x2) occupy two module
positions. Refer to the illustration on this page for an
example of plate location and orientation within a double-
wide enclosure. The table beneath the illustration lists the
dimensions and weight for each CAEN-UMP model.
Installation
The CAEN-UMP must be mounted in accordance with all
national and local codes.
NOTE: Adhere to Class 1 versus Class 2 wiring
requirements when considering the equipment
attached to the CAEN-UMPs in an enclosure.
NOTE: Third-party equipment attached to a
CAEN-UMP within a Crestron Automated Enclosure
should not be considered part of the Crestron system.
Use the four screws (8Bx1/4”, supplied) to attach a
CAEN-UMP to an enclosure. Crestron recommends that
the keyholes on the plates be located toward the outer
edges of the enclosure as shown in the drawing on this
page. As a result, the flanges of the plates do not overlap
each other when positioning any combination of CAEN-
UMP2x1s, CAEN-UMP1x1s, or lighting modules side-
by-side in an enclosure.
Further Inquiries
If after reviewing this guide, you cannot locate specific
information or have questions, please take advantage of
Crestron's award winning customer service team. Call:
• In the US and Canada, call Crestron’s corporate
headquarters at 1-888-CRESTRON
[1-888-273-7876] or 1-201-767-3400.
Example of CAEN-UMP Location and Orientation
2x2
2x1 2x1
1x2
1x1 1x1
Universal Mounting Plate Dimensions & Weight
CAEN-UMP 2x2 2x1 1x2 1x1
Height
15
1
/
8
15
1
/
8
7
7
/
16
7
7
/
16
Width
14 6
15
/
16
14 6
15
/
16
Depth
5
/
8
5
/
8
5
/
8
5
/
8
Weight
22 .6 12 .0 12 .4 6 .6
Dimensions are provided in inches, edge to edge.
Weight is provided in ounces.
Crestron Electronics, Inc. Installation Guide – DOC. 5981
15 Volvo Drive Rockleigh, NJ 07647 07.02
Tel: 888.CRESTRON
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Produktspezifikationen
| Marke: | Crestron |
| Kategorie: | Nicht kategorisiert |
| Modell: | CAEN-UMP1X2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Crestron CAEN-UMP1X2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Crestron
3 Dezember 2025
1 Dezember 2025
1 Dezember 2025
1 Dezember 2025
1 Dezember 2025
1 Dezember 2025
1 Dezember 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
Bedienungsanleitung Nicht kategorisiert
- Vigitron
- Manfrotto
- Xplora
- Columbus
- Dubatti
- AKG
- Exalux
- Metz Connect
- Sigma
- DS18
- Kela
- Fontiso
- AZZA
- Constructa
- Cambro
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026