Crestron FT2A-CBLR-BRKT-1400 Bedienungsanleitung

Lies die bedienungsanleitung für Crestron FT2A-CBLR-BRKT-1400 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 5 Bewertungen. Hast du eine Frage zu Crestron FT2A-CBLR-BRKT-1400 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick Start

The Crestron® FT2A-CBLR-BRKT-1200 and FT2A-CBLR-BRKT-1400 brackets mount below

the surface to the front or rear face of the FT2-1200 series and FT-1400 series of FlipTop™

Cable Management Systems, respectively. Each bracket provides slots to accommodate up

to two cable retractors and one power supply holder. The bracket enables cable retractors to

occupy the center module positions inside the FlipTop.

Check the Box

ItemQty

FT2A-CBLR-BRKT-1200 or FT2A-CBLR-BRKT-1400 (P/N 6510689 or 6510688)

Bracket, 9” x 3.6”

1

Screw, 10-32 x 5/16”, SEMS, Pan Head, Phillips (P/N 2007287) 2

Install the Bracket

NOTE: Up to two brackets (front and rear) can be installed on the larger FT2-1400 series

FlipTop. A single bracket can be installed to either the front or rear of the FT2-1200 series

FlipTop.

Determine whether to install the bracket to the front or rear face of the FlipTop. Using a

#2 Phillips screwdriver, position the bracket against the FlipTop and secure with two screws

(provided). Use the following drawings for visual reference.

Front Bracket Installation - FT2-1200 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1200 Series

FlipTop

Rear Bracket Installation - FT2-1200 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1200 Series

FlipTop

Front Bracket Installation - FT2-1400 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1400 Series

FlipTop

FT2A-CBLR-BRKT-1200/FT2A-CBLR-BRKT-1400

Front/Rear Bracket for Two Cable Retractors for FT2-1200 and FT2-1400 Series

Produktspezifikationen