Crystorama Alexa ALX-4501-AG Bedienungsanleitung

Lies die bedienungsanleitung für Crystorama Alexa ALX-4501-AG (2 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu Crystorama Alexa ALX-4501-AG oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

How to Install

All electrical components must be

installed by a licensed electrician

in accordance with the National

Electric Code and the appropriate

local electrical codes.

®

ASSEMBLY INSTRUCTION MODEL #ALX-4501-AG

This is a convertible piece. Installation steps for both

Hard-Wire and Plug-In options are below

4.75″

13.25

″

9

″

4.5″

14″

18.5″

5″

9″

25″

For Hard-wired installation, please proceed as follows:

1.Remove the plug wires from the fixture wires.

2.Remove the Nut (I) from the bottom of Back Plate (B)

and cover the hole with Plug (H).

6.Attach the Glass (E) onto Metal Cover (D) and secure

it with the Metal Spacer (F) and Socket Ring (G).

For Plug-in installation, please proceed as follows:

1.Connect Rod (J) to the bottom of Back Plate (B).

2.Determine the desired location you'd like to put

this fixture on the wall, and mark two points on

it with same distance as between the holes on

the Back Plate (B).

3.Drill the holes at the marked points and insert

the anchors into the holes in the wall.Attach

the mounting plate onto the wall by anchor screws.

4.Attach the Back Plate (B) onto mounting plate.

1″

WARNING: This product can expose you to Lead,

which is known to the State of California to cause cancer

and/or birth defects or reproductive harm. For more

information go to www.P65Warnings.ca.gov

3.Determine the desired location you'd like to put

this fixture on the wall, and mark two points on

it with same distance as between the holes on

the Back Plate (B).

4.Drill the holes at the marked points and insert

the anchors into the holes in the wall.Attach

the mounting plate onto the wall by anchor screws.

5.Attach the Back Plate (B) onto mounting plate.

5.Attach the Glass (E) onto Metal Cover (D) and secure

it with the Metal Spacer (F) and Socket Ring (G).

Produktspezifikationen