Crystorama Andover AND-9207-CL-MK Bedienungsanleitung


Seiten 2 Nicht kategorisiert

Lies die Bedienungsanleitung für Crystorama Andover AND-9207-CL-MK kostenlos online oder lade das PDF herunter. 11 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

ASSEMBLY INSTRUCTION MODEL #AND-9207-CL-MK
You will need 1-MediumBulb
60 Watts Recommended 100 Watts Max.
(Bulb not included)
USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS WET RATED
1.To install the glass shade, separate the Bottom
Cage by removing the Nut.
2.Insert the Glass Shade into the Bottom Cage.
3.Install the bulb into the socket.
4.Attach the Bottom Cage to the Top Cage by
screwing a Nut securing the two together.
5.Place the fixture over the post and mark 3 points
on the post at the center of each hole on the post
fitter.
6.Drill the holes at the marked points
7.Make the wire connections then place the fixture
base over the post and secure down by
tightening the screws
Crystorama.comCrystorama.com
Glass Replacement:
Follow instruction steps #1-7, in reverse,
skipping step #3, #5 and #6.
Bulb Replacement (Bulb not included):
Follow instruction steps #1-7, in reverse,
skipping step #5 and #6.
3" [76]

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Crystorama
Kategorie: Nicht kategorisiert
Modell: Andover AND-9207-CL-MK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Crystorama Andover AND-9207-CL-MK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten