CTA Digital PAD-AALDS Bedienungsanleitung


Lies die bedienungsanleitung für CTA Digital PAD-AALDS (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 10 Bewertungen. Hast du eine Frage zu CTA Digital PAD-AALDS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
PAD-AALDS
SUPPORT@CTADIGITAL.COM
Instructions:
Use this table to determine the appropriate
foam pad to use with your tablet.
Note: sizes refer to total tablet size with or
without a case.
m
m
Foam Pad
Thickness
Tablet
Thickness:
1mm 0.67-1.06in
5mm 0.51-0.91in
10mm 0.31-0.71in
17-27m
13-23m
8-18mm
/
/
/
1.Attaching Foam Pad to Tablet Holder
Select the appropriate foam pad according
to the thickness of your tablet (or tablet in its
case), then press adhesive side into center
of the tablet holder.
1mm Foam Pad
5mm
Foam
Pad
10mm
Foam
Pad
for 7-13 Inch Tablets
Angle-Adjustable Locking Desktop Stand
at point
Use Allen key to adjust tension of connection between the tablet holder and metal block .
LOCK
UNLOCK
LOCK
UNLOCK
LOCK
UNLOCK
2. Your Stand Mounting
2. Insert key and lock the holder, then take out the key,
ins your device lide the arm ert corner first. S back in until it
is tightly gripping your tablet by the corners.
LOCK
UNLOCK
LOCK
UNLOCK
1. Insert key and unlock the holder, then slide take out the key,
the arm to open to a width according to your need.
4. Adjusting your Tablet Holder:
Package Contents:
Keys
Screws
Foam Pads
1mm
5mm
10mm
1. Insert screw into hole on the stand
base and use a Phillips head
screwdriver to tighten.
3. Installing Your Device:
2. Repeat step 1 .for all screws
Allen Key


Produktspezifikationen

Marke: CTA Digital
Kategorie: Nicht kategorisiert
Modell: PAD-AALDS

Brauchst du Hilfe?

Wenn Sie Hilfe mit CTA Digital PAD-AALDS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten