CTA Digital PAD-ICCTKG Bedienungsanleitung

CTA Digital Nicht kategorisiert PAD-ICCTKG

Lies die bedienungsanleitung für CTA Digital PAD-ICCTKG (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu CTA Digital PAD-ICCTKG oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Caution: For proper results, please make sure your device is properly aligned with the inductive charging plate.

Peel the externsl

silicone sleeve from

the internal hard

case.

To open case, apply

gentle pressure to

the small clips

(noted on the

diagram by arrows).

The internal hard

case will open when

all four sides are

unclipped.

Once the iPad is

inside, plug the

lighning charging

cable into the power

socket. Then place

the internal front

(hard) cover on the

top of the case and

gently clip all four

sides shut.

Insert the iPad

into the back

portion of the

hard cover.

Reinstall

the

external

silicone

rubber

sleeve

Power Supply:

Input : AC 100-240V 50/60Hz

Output: DC12V 1.5A

Rating power:18W

Cable Length:1.8M

DC Plug: 5.5*2.1mm male DC Plug

Inductive Charging Case:

Qi Standard: V1.2.4

Input: DC12V 1.3A

Output: DC5V 2.4A(Max.)

Rating Power: 15W

Efficiency: 80-85%(Max.)

Inductive Distance:3-6mm

Input Socket: 5.5*2.1mm female DC socket

Output Plug:Apple Lightning Plug

Charging Time :4-4.5 hours)

Environmental Requirements:

Operating Temperature for iPad: 32℉ to 95℉ / 0℃ to 35℃

Nonoperating Temperature: -4℉ to 113℉ / -20℃ to 45℃

Caution: Please do not place or store the product on or near high-temperature areas like heating devices, open

flame, or in hot cars in extreme heat.

Caution: Please do not place or store the product in or near water, steam, or in any wet, humid, or damp places.

PAD-ICCB / PAD-ICCTK / PAD-ICCTKG / PAD-ICCSUB / ADD-ICCSTAND

For iPad 10.2” 7th/8th Gen, iPad Pro 10.5 Inch and iPad Air 3 (2019)

Connect the AC/DC Power Supply to the charging plate as pictured.

1. Locate kickstand at case rear and fold out underneath strap.

2. Display tablet at desired viewing angle.

3. Press kickstand in to return to handheld mode.

TABLETOP OR HANDHELD MODE

CONNECT TABLET CASE TO STAND

IPAD/STAND CHARGING

Take care to assure that

the charging case and back

charging plate are aligned

properly. When done

properly, you’ll see the blue

indicator light up on the

back of the charging plate.

A blue indicator light tells you your

iPad is properly connected to the

inductive charging plate.

Note the power level

displayed on the iPad

screen.

Produktspezifikationen

Marke:	CTA Digital
Kategorie:	Nicht kategorisiert
Modell:	PAD-ICCTKG
Schutzfunktion:	Wasserdicht
Kabelloses Aufladen:	Ja
Breite:	177 mm
Tiefe:	208 mm
Gewicht:	1315 g
Produktfarbe:	Grün
Höhe:	144 mm
Material:	Metal, Rubber
Menge pro Packung:	1 Stück(e)
Vorgesehene Verwendung:	Tisch/Bank
Kompatibilität:	iPad 7th/ 8th/ 9th Generation 10.2-inch, iPad Pro 10.5-inch, iPad Air 3
Maximale Bildschirmgröße:	10.5 "
Ausrichtung:	Horizontal/Vertikal
Minimum Bildschirmgröße:	10.2 "
Handy-Gerätetyp:	Tablet/UMPC
Gerätemontagetyp:	Nein