Cuisinart CGWM-070 Bedienungsanleitung

Lies die bedienungsanleitung für Cuisinart CGWM-070 (4 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Cuisinart CGWM-070 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. Remove the storage sleeve and pull off the insulation film on the back side of the product.

2. Slide ON/OFF switch to "ON" on the back side of thermometer.

3. Slide °C/°F switch to “°C” to display Celsius or “°F” to display Fahrenheit.

4. Custom temperature mode

(1) “ MEAT” mode and “BEEF-RARE” are set by default. Press and to switch to “USER” and other meat.◄ ►

Press “MODE”, it will flash, press or to switch to meat(BEEF-LAMB-VEAL-PORK-FISH◄ ►

-CHICK-TURKY-BURG-USER-BEEF) Press “MODE” to select one meat, then press or to select taste, press “MODE” to ◄ ►

confirm taste, MEAT and TASTE will flash 2S.

(2) Press or to switch to “USER”, Press “MODE” to set temperature. “--”stands for no selected alarm temperature. Press ◄ ►◄

or , “--” starts at 50°C by default. Press “MODE” to confirm the selected temperature.►

Temperature reset: press “MODE” and then press and in the same time, it will show “--”,then press “MODE” .◄ ►

To set temperature, press or . Press left button to minus or right button to add. Press and hold in for 2S to fast-forward or ◄ ►

fast-backward. Confirm desired temperature.

If you set “ ” it will beep and the LCD will flash when temperature is finished. Press any button to cancel the alarm.

5. Temperature function:

Insert the thermometer into the thickest part of the meat or poultry. The tip should be at least 1 inch into the meat or poultry but

not in contact with bone or gristle. When the temperature is stable, press “HOLD” to lock the temperature on screen (“HOLD”

appears on screen). Remove the thermometer to check whether the desired temperature is reached. If not, press the “HOLD”

button again to release the locked-in temperature and display current temperature (“HOLD” disappear on screen). Repeat the

above steps until the desired temperature is reached.

6. Backlight/Alarm mode option.

Turn on the backlight and alarm by default, press “HOLD” for 2S to enter backlight and alarm setting, it’s set mode icon flash, press

“HOLD” to switch mode.

Press “HOLD” for 2S, the corresponding icon will flash 3 times, confirm the desired mode and exit select status.

Without confirming manually selected mode after 5S, it will confirm automatically and exit mode selection.

Under the status of mode selection, other buttons can not trigger functions. Exit the mode selection state to trigger button setting

function.

7. Timer count-up or count-down:

Hold down “MODE” for 2s to switch between meat choice/timer mode.

USER MANUAL

PACKAGE CONTENTS

HOLD

BUTTON

RIGHT

BUTTON(+)

LEFT

BUTTON(-)

MODE

SET

HOL D

MEAT

TAST E

T IME R

BACK LIGHTHOLD

LOW BATTERY

INDICATOR

CURRENT

TEMPERATURE

TIMER

TASTE

ALARM

CUSTOM TEMP

MEAT

CHOICES

SET

HOL D

MEAT

TAST E

T IME R

°C/°F

BATTERY

COVER

ON/OFF

Buttons (front)ScreenBack

OPERATING INSTRUCTIONS

To set a count-down time, press or to set “H” and “M”, press left button to minus, press right button to ◄ ►

add, press and hold for 2S to fast-forward or fast-backward. Press“MODE” to confirm the setting of “H” or “M”.

Press“MODE” to begin or pause counting under TIMER mode, if you set “ ” it will beep and the LCD will

flash when count-down is finished. Press any button to cancel the alarm.

To pause the timer, press and in the meantime to reset to zero.◄ ►

Slide switch to “OFF” to conserve battery life when you finish cooking.

To start a count-up, start from zero, the timer will count up to 23 hours,59 minutes.

SET

HOLD

TIMER

O utd oor Gri ll in g Prod ucts

INSTANT READ

THERMOMETER

Model NO: CGWM-070

Produktspezifikationen