CyberPower B6032PK Bedienungsanleitung


Lies die bedienungsanleitung für CyberPower B6032PK (1 Seiten) kostenlos online; sie gehört zur Kategorie Anbaustein. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu CyberPower B6032PK oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
FEATURES
protection that will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between
the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal
TROUBLESHOOTING
YOUR ULTIMATE ALLY IN POWER
Cyber P er Systems (USA), Inc. ow
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberP erSystems.com ow
SPECIFICATIONS
K01-E000120-00
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a
15A breaker. When an overload occurs, it will
automatically switch o˜. To resume operation,
ensure the overload condition is removed and reset
the surge protector by switching the unit ON.
2. Protected LED Indicator
Illuminated when the surge protection feature is
working properly.
3. Standard Grounded Outlets (6)
4. Power Cord
Model Number: B6032PK/B604/B604BK/
B608/B6012
Outlets: Standard Grounded Outlets (6),
P er Cord Length: B6032PK: 3 ft ow
B604/B604BK: 4ft
B608: 8 ft
B6012: 12 ft
Surge Protection: 600 Joules
Electrical Rating: 125V/15A/1875W
UL Clamping Voltage: UL1449 4th/800V(L-N)
Maximum Peak Current: L-N 15,000 A
Response Time: Less than 1 nanosecond
Circuit Breaker: Resettable 15 Amp
6-OUTLET
SURGE PROTECTOR
B6032PK/B604/B604BK/B608/B6012
FOR MORE INFORMATION
Visit CyberP erSystems.com for more information regarding: ow
• Product information and certifications
• Product warranty
• Connected equipment guarantee
TECHNICAL SUPPORT
Visit: CyberP erSystems.com/support ow
Toll-Free: 1-877-297- 37 69
© 2025 Cyber Power Systems (USA), Inc. All rights reserved.
CyberPower and the CyberPower logo are trademarks of Cyber Power
Systems, Inc., and/or aliates, which are registered in many countries and
regions. All other trademarks are the property of their respective owners.
If the ON/OFF Reset Control switches to the OFF position, the 15-amp circuit
breaker may have been tripped. Examine your connected equipment and
remove the device overloading the circuit, causing the trip. Then, turn the
ON/OFF Reset Control back to RESET.
If the PROTECTED indicator does not light, the surge protector’s outlets are no
longer protected from power surges or spikes. The surge protector may have
received a power surge or spike beyond its specified limits that have
overloaded the protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment as designed, but it will not
protect against future surges and spikes. It should be replaced.
1
4
2
3
i WARNING: This product can expose you to chemicals including vinyl chloride
and bisphenol A (BPA), which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.
P65Warnings.ca.gov.


Produktspezifikationen

Marke: CyberPower
Kategorie: Anbaustein
Modell: B6032PK

Brauchst du Hilfe?

Wenn Sie Hilfe mit CyberPower B6032PK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten