CyberPower Essential CSB404 Bedienungsanleitung

Lies die bedienungsanleitung für CyberPower Essential CSB404 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu CyberPower Essential CSB404 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSB404 Surge Protector.

This manual explains the features and operation of the CSB404.

Please take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A breaker.

When an overload occurs, it will automatically switch o.

To resume operation, ensure the overload condition is removed

and reset the surge protector by switching the unit ON.

2. Standard Grounded Outlets (4)

SPECIFICATIONS

• Model Number: CSB404

• Outlets: 4 Standard Grounded Outlets

• Surge Protection: 450 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 4th/500 V (H-N, H-G, N-G)

• Maximum Peak Current: 22,500 A

• 3 AC Lines Protected: H-N: 7,500 A, H-G: 7,500 A, N-G: 7,500 A

(The maximum surge possible on household wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 43 dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

• Circuit Breaker: Resettable 15 Amp

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. DO NOT plug into another relocatable

power tap. DO NOT “daisy chain” surge protectors. use DO NOT

with any aquarium equipment. DO NOT use if properly grounded

outlets are not available. install this device if there is less DO NOT

than 10 meters (30 feet) or more of wire between the electrical

outlet and electrical service panel. DO NOT use for medical or life

support equipment. This device features an internal protection that

will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit breaker may

have tripped. Examine your connected equipment and remove

the device that is overloading the circuit. Then, turn the

ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

4-Outlet Surge Protector

CSB404

4-Outlet Surge Protector

CSB404

1 2

Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.

1

RESET

OFF

2

Produktspezifikationen