CyberPower GXS604C2 Bedienungsanleitung

Lies die bedienungsanleitung für CyberPower GXS604C2 (1 Seiten) kostenlos online; sie gehört zur Kategorie Anbaustein. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 9 Bewertungen. Hast du eine Frage zu CyberPower GXS604C2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

FEATURES

YOUR ULTIMATE ALLY IN POWER

Cyber Per Systems (USA), Inc. ow

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379

CyberPerSystems.com ow

SPECIFICATIONS

K01-1101151-P0

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a

15A breaker. When an overload occurs, it will

automatically switch o˜. To resume operation, ensure the

overload condition is removed and reset the surge

protector by switching the unit ON.

2. Protected LED Indicator

Illuminated when the surge protection feature is working

properly.

3. Standard Grounded Outlets (6)

4. USB-C Charging Ports (2)

5. Customizable RGB Accent Lighting

6. Power Cord

7. Capacitive Touch RGB Light Control

Model Number: GXS604C2

Outlets: Standard Grounded Outlets (6),

USB-C Charging Ports (2)

Per Cord Length: 4 ft ow

Surge Protection: 2400 Joules

USB Charging Output: USB-C 5V / 3.6A

USB Total Output: 18W

Electrical Rating: 125V/15A/1875W

UL Clamping Voltage: UL1449 4th/800V(L-N, L-G, N-G)

Maximum Peak Current: 60,000 A

3 AC Lines Protected: L-N: 30,000 A; L-G: 15,000 A;

N-G: 15,000 A

Response Time: Less than 1 nanosecond

Circuit Breaker: Resettable 15 Amp

6-OUTLET

SURGE PROTECTOR

with 2 USB PORTS

GXS604C2

TECHNICAL SUPPORT

Visit: CyberPerSystems.com/support ow

Toll-Free: 1-877-297-37 69

© 2025 Cyber Power Systems (USA), Inc. All rights reserved.

CyberPower and the CyberPower logo are trademarks of Cyber Power

Systems, Inc., and/or a°liates, which are registered in many countries and

regions. All other trademarks are the property of their respective owners.

TROUBLESHOOTING

If the ON/OFF Reset Control switches to the OFF position, the 15-amp circuit

breaker may have been tripped. Examine your connected equipment and

remove the device overloading the circuit, causing the trip. Then, turn the

ON/OFF Reset Control back to RESET.

If the PROTECTED indicator does not light, the surge protector’s outlets are no

longer protected from power surges or spikes. The surge protector may have

received a power surge or spike beyond its specified limits that have

overloaded the protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as designed, but it will not

protect against future surges and spikes. It should be replaced.

i WARNING: This product can expose you to chemicals including vinyl chloride

and bisphenol A (BPA), which are known to the State of California to cause

cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.

DO NOT plug into another relocatable power tap.

DO NOT “daisy chain” surge protectors.

DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not available.

DO NOT install this device if there is less than 10 meters (30 feet) of wire between

the electrical outlet and electrical service panel.

DO NOT use for medical or life support equipment. This device features an internal

protection that will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

FOR MORE INFORMATION

Visit CyberPowerSystems.com for more information regarding:

• Product information and certifications

• Product warranty

• Connected equipment guarantee

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment on and o˜, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit di˜erent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the

party responsible for compliance could void the user’ s authority to

operate the equipment.

RGB Lighting Instructions

Long press the capacitive touch button to turn on and turn o˜.

Double-tap the capacitive touch button quickly to change the brightness setting.

Single-tap the capacitive touch button to cycle through the available RGB

lighting modes.

1

4

5

6

7

7

2

3

Produktspezifikationen