D-Link ANT24-0401 Bedienungsanleitung

D-Link TV-Antenne ANT24-0401

Lies die bedienungsanleitung für D-Link ANT24-0401 (23 Seiten) kostenlos online; sie gehört zur Kategorie TV-Antenne. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu D-Link ANT24-0401 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/23

CAUTION!!

Please always put the surge protector

indoors and near the device

side, if you cannot keep it indoors,

use the tapes to wrap all the connectors

as pictures showed below.

Option: Ultra low-loss cable LMR400

Length options: 3M/6M/9M

Option: Surge protector

Connectors: N-plug to N-jack

ANT24-SP Surge protector

Installation guide

for outdoor antenna-kit

Step 1

loosen the screw from the surge protector.

Step 2

get a normal conductive copper wire with 2 sides stripped long enough to be conductive,

these wires can lead high voltage surges into the grounding.

Remark:

(1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has.

(2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the higher

voltage it can sustain.

Option (1)

Option (2)

Ground

Step 3

find a conductive material nearby the antenna installation sites, connect another end of the wire

into position, there are several options:

(1) Use a long screw to stick into the ground tightly, connect another wire onto.

(2) fix or solder another end of wire onto a steel material/ bar under steel construction,

such as wall for buildings, railings or other conductive materials which set up from

the ground.

Produktspezifikationen

Marke:	D-Link
Kategorie:	TV-Antenne
Modell:	ANT24-0401
Gewicht:	100 g
Impedanz:	50 Ohm
Antennentyp:	Omnidirektionale Antenne
Betriebstemperatur:	-40 - 80 °C
Kabellänge:	2 m
Antenne Zunahmeniveau (max):	4 dBi
Frequenzband:	2.4 - 2.5 GHz
Abmessungen (BxTxH):	132 x 42 mm