D-Link DBT-900AP Bedienungsanleitung
D-Link
Zugangspunkt
DBT-900AP
Lies die bedienungsanleitung für D-Link DBT-900AP (53 Seiten) kostenlos online; sie gehört zur Kategorie Zugangspunkt. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu D-Link DBT-900AP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/53
Check Your Package Contents
These are the items included with your DBT-900AP purchase:
If any of the above items are missing, please contact your reseller.
• D
BT
-
900AP
Bluetooth
-
to
-
LAN Access Point
• Power Adapter
• RJ-45 LAN Cable
DBT-900AP
D-Link PersonalAir™
Bluetooth-to-
LAN Access Point
©2003 D-Link Corp. A
ll rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DBT-900AP 09052003
2
Connect the DBT-900AP Bluetooth
Access Point to Your Network
Straight up the antenna of the DBT-900AP
You may need to adjust the direction of the antenna to get better signal strength.
Attach the External Power Supply for DBT-900AP
Attach the external power supply to the DC power input connector located on the rear
panel of DBT-900AP and connect it to your local power supply. The Power LED will
turn ON to indicate proper operation.
Connecting DBT-900AP to Your Network
Insert one end of the cable to the Ethernet port on the back panel of the DBT-900AP
and the other end of the cable to an Ethernet Broadband Router (i.e., D-Link DI-
604) or Switch (i.e., D-Link DES-1005D) that supports DHCP Client function. The
LAN LED light will illuminate to indicate a proper Ethernet connection.
Note: The Ethernet Port on DBT-900AP is Auto-MDI/MDIX. Meaning you can use a
straight-through or crossover-Ethernet cable to connect to the Ethernet port on the
DBT-900AP.
Connect Bluetooth-enabled
computers to DBT-900AP
Note:
This Access Point supports the state-of-the-art PAN profile. Please make sure if your
Bluetooth Software installed in your computers or PDAs support this profile before
this step.
This Access Point does not need to install any specific driver; it requires the Bluetooth
adapter (for example: D-Link DBT-120 USB Bluetooth Adapter) to be installed on the
PC or laptop computer in order to access to the DBT-900AP wirelessly.
The step-by-step instructions that follow are shown with Widcomm Bluetooth Software
(version 1.4 or above) that included with D-Link DBT-120 USB Bluetooth Adapter
under Windows 98SE/ME/2000.
Right-click to the “B” logo on the system tray and choose “Explorer” or double click
“My Bluetooth Places” to open Bluetooth Adapter.
Produktspezifikationen
| Marke: | D-Link |
| Kategorie: | Zugangspunkt |
| Modell: | DBT-900AP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit D-Link DBT-900AP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zugangspunkt D-Link
24 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
24 September 2024
22 September 2024
13 September 2024
10 August 2024
3 August 2024
2 August 2024
Bedienungsanleitung Zugangspunkt
- Eminent
- Brocade
- DrayTek
- Advantech
- Dahua Technology
- Meru
- Comtrend
- FlyingVoice
- Aerohive
- Extreme Networks
- Ubiquiti Networks
- Amer
- Vimar
- Cisco
- Cambium Networks
Neueste Bedienungsanleitung für -Kategorien-
25 Juni 2025
23 Juni 2025
22 Juni 2025
20 Juni 2025
20 Juni 2025
14 Juni 2025
14 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025