D-Link DES-1008P Bedienungsanleitung

D-Link Verschiedenes – Sonstiges DES-1008P

Lies die bedienungsanleitung für D-Link DES-1008P (17 Seiten) kostenlos online; sie gehört zur Kategorie Verschiedenes – Sonstiges. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 10 Bewertungen. Hast du eine Frage zu D-Link DES-1008P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/17

D-Link

DES-1008P

8-Port 10/100Mbps

with 4 PoE Ports Switch

User Guide

FCC Warning

This equipment has been tested and found to comply with the

regulations for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with this user guide, may cause harmful interference to

radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will

be required to correct the interference at his/her own expense.

CE Mark Warning

This is a Class B product. In a domestic environment, this product

may cause radio interference, in which case the user may be required

to take adequate measures.

UL Warning

a) Elevated Operating Ambient Temperature- If installed in a closed

or multi-unit rack assembly, the operating ambient temperature of the

rack environment may be greater than room ambient. Therefore,

consideration should be given to installing the equipment in an

environment compatible with the manufacturer's maximum rated

ambient temperature (Tmra).

b) Reduced Air Flow- Installation of the equipment in a rack should

be such that the amount of air flow required for safe operation of the

equipment is not compromised.

c) Mechanical Loading- mounting of the equipment in the rack

should be such that a hazardous condition is not achieved due to

uneven mechanical loading.

d) Circuit Overloading- Consideration should be given to the

connection of the equipment to the supply circuit and the effect that

overloading of circuits might have on over current protection and

supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

e) Reliable Earthing- Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to supply

connections other than direct connections to the branch circuit (e.g.,

use of power strips).

Ver. 1.00

Produktspezifikationen

Marke:	D-Link
Kategorie:	Verschiedenes – Sonstiges
Modell:	DES-1008P
Gewicht:	454 g
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 95 %
Zertifizierung:	- FCC Class B\n- CE\n- VCCI
Stromverbrauch (Standardbetrieb):	62.3 W
Power over Ethernet (PoE):	Ja
Temperaturbereich bei Lagerung:	-10 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Energiebedarf:	48V DC/1.45A
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	8
MAC-Adressentabelle:	1000 Eintragungen
Abmessungen (BxTxH):	171 x 98 x 29 mm
Store-and-Forward:	Ja
Sicherheit:	LVD
Unterstützung Datenflusssteuerung:	Ja
Max. Datenübertragungsrate:	1 Gbit/s