D-Link DIS-100G-8SW Bedienungsanleitung
Seiten 4 Nicht kategorisiert
Lies die Bedienungsanleitung für D-Link DIS-100G-8SW kostenlos online oder lade das PDF herunter. 23 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
1
DIS-100G Series Unmanaged
Industrial Gigabit Ethernet
Switch
Quick Installation Guide
Overview
The DIS-100G unmanaged Industrial Gigabit Ethernet
Switch solutions are designed for supporting standard
industrial applications without complex setup to makethe
network truly plug-and-play.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Package Checklist
Please verify that the box contains the following items:
Item Quantity
Unmanaged switch1
Wall-mount plates2
DIN-Rail kit1
M4 Screws
(for thewall mount plates & DIN Rail kit)
4
DC power terminal block1
Quick Installation Guide1
Safety Instructions
When a connector is removed during installation, testing, or
servicing, or when an energized fiber is broken, a risk of
ocular exposure to optical energy that may be potentially
hazardous occurs, depending on the laser output power.
The primary hazards of exposure to laser radiation from an
optical-fiber communication system are:
Damage to the eye by accidental exposure to a beam
emitted by a laser source.
Damage to the eye from viewing a connector attached
to a broken fiber or an energized fiber.
Documentation Conventions
The following conventions are used in this quick installation
guideto emphasize information that will be of interest to the
reader.
Danger — The described activity or situation might or
will cause personal injury.
Warning — The described activity or situation might or
will cause equipment damage.
Caution — The described activity or situation might or
will cause service interruption.
Note — The information supplements the text or
highlights important points.
DIN-Rail Mounting
Mounting step:
1.Screw the DIN-Rail bracket on with the bracket and
screws in the accessory kit.
2.Hook the unit over the DIN rail.
3.Push the bottom of the unit towards the DIN Rail until it
snaps into place.
Wall Mounting (unit: mm)
Mounting step:
1.Screw on the wall-mount plate on with the plate and
M4 screws in the accessory kit.
2
3
Produktspezifikationen
| Marke: | D-Link |
| Kategorie: | Nicht kategorisiert |
| Modell: | DIS-100G-8SW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit D-Link DIS-100G-8SW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert D-Link
D-Link DGS-1530 Bedienungsanleitung D-Link Nuclias DNH-1000 Bedienungsanleitung D-Link DIS-200G-12SW Bedienungsanleitung D-Link DIS-200G-12PSW Bedienungsanleitung D-Link DIS-F200G-6PS-E Bedienungsanleitung D-Link DIS-100E-05 Bedienungsanleitung D-Link DIS-100G-06P Bedienungsanleitung D-Link DIS-100G-06 Bedienungsanleitung
Beliebt in Nicht kategorisiert
D-Link DIS-S301SX Bedienungsanleitung D-Link DEM-312GT2 Bedienungsanleitung D-Link DPS-800 Bedienungsanleitung