D-Link DXE-810T Bedienungsanleitung

D-Link Nicht kategorisiert DXE-810T

Lies die bedienungsanleitung für D-Link DXE-810T (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu D-Link DXE-810T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/13

D -XE 810T

Single Port 10GBASE-T RJ45 PCI Express Adapter

Manual

V1 0.0

Table of Contents

INTRODUCTION ............................................................................................................................................. 3

System Requirements ..................................................................................................................................... 3

Features 3 ..........................................................................................................................................................

INSTALLATION .............................................................................................................................................. 4

Unpack and Inspect ......................................................................................................................................... 4

Software Installation ........................................................................................................................................ 4

Installing the Adapter ....................................................................................................................................... 5

TROUBLESHOOTING .................................................................................................................................... 7

SPECIFICATIONS 8..........................................................................................................................................

OPTIMIZED PERFORMANCE TUNING ......................................................................................................... 9

Preinstalled Systems ....................................................................................................................................... 9

OS Optimization ............................................................................................................................................ 10

BENCHMARK PERFORMANCE TUNING ................................................................................................... 11

OS Optimization ............................................................................................................................................ 11

Benchmark Testing With Iperf ....................................................................................................................... 13

Introduction

Thank you for choosing the D-Link 810T among DXE- , the leader in value 10 Gigabit Etherne adapters for t

PCI Express 810T bus personal computers. The D Link DXE- - PCI Express 10 Gigabit Ethernet Adapter is a

high-performance adapter designed for the high-speed PCI Express Bus Architecture. The PCI Express 10

Gigabit Ethernet Adapter offers increased bandwidth, reliability, and more functionality than standard PCI

network cards. It is specifically designed to allow throughput at rates up to 20 Gbps, eliminating the

bottleneck that exists with current 32 and 64 bit PCI bus architectures.-

System Requirements

Before installing the DXE-810T, check your system for the following minimum configuration requirements for

optimal results.

 s: A motherboard that support

 At least one PCIe Gen2 x4 (or more) slot

 A chipset with native support for the installed CPU. For example:

 H61, H67 or Z68 from B3 stepping or better for Sandy Bridge CPUs

 B75, H77 or Z77 for Ivy Bridge CPUs

 -c Dual hannel memory with support for at least 2 DIMMs (1 for each channel)

 Memory: DDR3 Memory running at 667 one DIMM per channel MHz (DDR1333) populating

 CPU: Sandy Bridge i7 or better, or Ivy Bridge i5 or better

 BIOS updated and configured to “Optimized Defaults”

Features

Designed for versatility and performance, the dapter provides the following:DXE-810T etwork n a

 V Universal Bus supporting 3.3 operation

 t n Complian with IEEE 802.3a 10 Gbps Ethernet over Unshielded Twisted Pair (UTP) standards:

o Supports up to 100 m of Cat6A or better

o s Supports Cat6 and Cat5e cables compliant with Link Segment specification

o s -N - - - Support Auto egotiation (100BASE T, 1000BASE TX, 10GBASE T)

o - 5- Compliant with NBASE T Alliance speed (100M/1G/2.5G/5G/10G) draft proposal

 F D G Supports ull uplex at 10 bps

 s Support Jumbo Frames up to 16 KB

 Supports 802.3x flow control

 Supports 802.1Q VLAN Tagging

 - One built in RJ45 connector

 RJ45 LED indicators: Activity and Link/Speed

 Driver

†

support for:

 Microsoft Windows 8, 78.1,

 Microsoft Windows Server 2012R2, 2012, 2008R2

 -V Windows Hyper

† Check http://www.dlink.com for drivers.the latest

Produktspezifikationen

Marke:	D-Link
Kategorie:	Nicht kategorisiert
Modell:	DXE-810T
WLAN:	Nein
Breite:	133.3 mm
Tiefe:	121.9 mm
Übertragungstechnik:	Kabelgebunden
Höhe:	21.6 mm
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3an, IEEE 802.3u, IEEE 802.3x
Zertifizierung:	CE, C-Tick, FCC, BSMI
Vollduplex:	Ja
Maximale Datenübertragungsrate:	20000 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Stromversorgung:	8.04 W
Eingebaut:	Ja
LED-Anzeigen:	Activity, Link, Speed
Temperaturbereich bei Lagerung:	-20 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Jumbo Frames Unterstützung:	Ja
Schnittstelle:	Ethernet
Unterstützung anderer Betriebsysteme:	VMware vSphere ESXi
Ausgangsspannung:	3.3 V
Ethernet Schnittstellen Typ:	Fast Ethernet, Gigabit Ethernet
Verkabelungstechnologie:	10/100/1000BaseT(X)
Unterstützte Linux-Betriebssysteme:	Ja
Auto-Negotiation-Funktion:	Ja
Unterstützung Datenflusssteuerung:	Ja
Hostschnittstelle:	PCI Express
Unterstützte Server-Betriebssysteme:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2
Ethernet/LAN:	Ja