D-Link DXS-3600-16S Bedienungsanleitung
Lies die bedienungsanleitung für D-Link DXS-3600-16S (52 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu D-Link DXS-3600-16S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/52

Documentation also available on
CD and D-Link Website
Getting Started Guide For
D-Link Managed Switches

2
ENGLISH
About This Guide
This guide gives step-by-step instructions for setting up all
D-Link managed switches and relative Warranty, Safety,
Regulatory, and Environment Notice. Please note that the
model you have purchased may appear slightly different
from those shown in the illustrations.
For more detailed information about your switch, its
components, making network connections, and technical
specications, please refer to the User’s Guide included
with your switch.
Step 1 – Unpacking
Open the shipping carton and carefully unpack its
contents. Please consult the packing list located in the
User Guide to make sure all items are present and
undamaged. If any item is missing or damaged, please
contact your local D-Link reseller for replacement.
Items Included in Switch Packages
Item
Type of Switch *
Unmanaged
Smart or
Managed
Palm
Desktop/Rack
Mount
Chassis
Device Yes Yes Yes Yes
RS-232 Cable
(Printer cable)
No No Yes Yes
Rack
Mounting
Brackets
No Yes Yes Yes
Rubber Feet Yes Yes Yes Yes
Power Cord
(Adapter)
Yes Yes Yes Yes
User’s Guide Yes Yes Yes Yes
Multi-lingual
QIG **
Yes Yes Yes Yes
*Stackable switches, unlike standalone switches, should also
include a cascade cable.
Step 2 – Switch Installation
For safe switch installation and operation, it is
recommended that you:
• Visually inspect the power cord to see that it is secured
fully to the AC power connector.
• Make sure that there is proper heat dissipation and
adequate ventilation around the switch.
• Do not place heavy objects on the switch
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the
rubber feet included with the device must be attached
on the bottom at each corner of the device’s base. Allow
enough ventilation space between the device and the
objects around it.
Figure 1. Attaching the rubber feet
Rack Installation
The switch can be mounted in an EIA standard size
19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets
to the switch’s side panels (one on each side) and
secure them with the screws provided (please note that
these brackets are not designed for palm size switches).
Figure 2. Attaching the mounting brackets
Then, use the screws provided with the equipment rack
to mount the switch in the rack.
Figure 3. Installing the switch in a standard-sized
equipment rack
Produktspezifikationen
Marke: | D-Link |
Kategorie: | Schalter |
Modell: | DXS-3600-16S |
Upgradefähige Firmware: | Ja |
Breite: | 440 mm |
Tiefe: | 506 mm |
Gewicht: | 9890 g |
Produktfarbe: | Schwarz |
Höhe: | 44 mm |
AC Eingangsspannung: | 100 - 240 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
Betriebstemperatur: | 0 - 45 °C |
Relative Luftfeuchtigkeit in Betrieb: | 0 - 95 % |
Netzstandard: | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.3 |
Unterstützte Sicherheitsalgorithmen: | SSH |
Quality of Service (QoS) Support: | Ja |
Zertifizierung: | FCC, CE, C-Tick, IC, VCCI, BSMI |
Vollduplex: | Ja |
Stromverbrauch (Standardbetrieb): | 69.9 W |
Power over Ethernet (PoE): | Nein |
Betriebsanleitung: | Ja |
LED-Anzeigen: | Ja |
Temperaturbereich bei Lagerung: | 40 - 70 °C |
Luftfeuchtigkeit bei Lagerung: | 0 - 95 % |
Switch-Typ: | Managed |
Basic Switching RJ-45 Ethernet Ports-Typ: | Gigabit Ethernet (10/100/1000) |
Konsolen-Port: | RJ-45 |
10G-Unterstützung: | Ja |
MAC-Adressentabelle: | 12800 Eintragungen |
Routing-/Switching-Kapazität: | 480 Gbit/s |
Durchgang: | 357.14 Mpps |
Jumbo Frames Unterstützung: | Ja |
Rack-Einbau: | Ja |
Kompatible Speicherkarten: | SD |
Web-basiertes Management: | Ja |
Multicast Unterstützung: | Ja |
Head-of-Line (HOL)-Blocking: | Ja |
Port-Spiegelung: | Ja |
Link Aggregation: | Ja |
Spannbaum-Protokoll: | Ja |
VLAN-Unterstützung: | Ja |
DHCP-Funktionen: | DHCP server, DHCP client |
Stapelbar: | Ja |
Sicherheit: | CB, cUL |
Unterstützung Datenflusssteuerung: | Ja |
Anzahl Queues: | 8 |
Datenpaket-Pufferspeicher: | 9 MB |
Wärmeableitung: | 253.36 BTU/h |
Zugriffkontrollliste: | Ja |
Anzahl Lüfter: | 3 Lüfter |
Anzahl von Stromversorgungseinheiten: | 1 |
SSH-/SSL-Unterstützung: | Ja |
Menge Modul-Steckplätze SFP+: | 8 |
IGMP-Snooping: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit D-Link DXS-3600-16S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter D-Link
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
Bedienungsanleitung Schalter
- Finder
- One For All
- Toolcraft
- Perel
- Wallair
- Honeywell
- Techly
- Sonance
- Linksys
- Tork
- Velleman
- Adder
- Fantini Cosmi
- Goobay
- Jabra
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025