Danfoss SonoSelect 10 Bedienungsanleitung
Lies die bedienungsanleitung für Danfoss SonoSelect 10 (38 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Danfoss SonoSelect 10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/38
2 01.02.00 © Danfoss| Energy Meters| 2018.02|
1 Basic information 4 ....................................................................................................
1.1 The physical layer ............................................................................................. 4
1.2 Wake up process and baud rate changes (IR) ....................................................... 4
1.3 Baud rate changes 4 ............................................................................................
1.3.1 Wait time before reply after correct message reception .................................... 5
1.4 Data Link layer (DLL) ......................................................................................... 5
1.4.1 C field (Control field, Function fiel Field size 1 byte d) – ................................... 5
1.4.2 A Field (Address Field) 1 byte 6 –....................................................................
1.4.3 L Field 2 fields with a size of 1 byte –............................................................ 7
1.4.4 CS field 1 byte –......................................................................................... 7
1.5 Combined Transportation and application layer ..................................................... 8
1.5 CI Field (Control information field) .1 ................................................................ 8
1.5.2 Long header ............................................................................................... 9
1.5.3 Status byte and error handling ................................................................... 10
1.5.4 DIF & VIF configuration of data records ........................................................ 11
1.6 The standard read out ..................................................................................... 13
2 Communication process ......................................................................................... 16
2.1 M-Bus EN 13757 data frames ........................................................................... 16
2.2 Pulse readout . ................................................................................................ 17
2.3 Application reset ............................................................................................. 17
2.4 Send/Confirm procedures available using the Danfoss Meter ................................. 21
2.4.1 SND_NKE ................................................................................................. 21
2.4.2 SND_UD .................................................................................................. 22
2.4.3 REQ_UD2 ................................................................................................. 34
2.4.4 RSP_UD ................................................................................................... 35
Annex A ..................................................................................................................... 36
3 01.02.00 © Danfoss| Energy Meters| 2018.02|
Identify the needed telegrams from the EN13757 standard and determine how to implement
the SonoSelect 10 and SonoSafe 10 communication protocol into an M-Bus telegram. This
document contains the description the M-Bus protocol implemented for SonoSelect 10 and
SonoSafe 10. The M-Bus protocol will follow the EN13757 standard.
According to the software architecture of the SonoSelect 10 and SonoSafe 10 the
communication shall be split into three layers.
Figure 1 - OSI model and architecture of HM
The M-Bus protocol for the IR and Wired communication will be identical and therefore these
two components will share the same data-link and application layer. The M-Bus will only
support physical, data-link and combined transportation and application layer. The other layers
stated in EN13757-3 are optional and will not be part the wired M-Bus implementation of the
SonoSelect 10 and SonoSafe 10. According to the EN13757-1 standard the transportation layer
must be handled in an Application Layer.
Produktspezifikationen
| Marke: | Danfoss |
| Kategorie: | Messung |
| Modell: | SonoSelect 10 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Danfoss SonoSelect 10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Danfoss
2 November 2023
2 November 2023
2 November 2023
2 November 2023
23 August 2023
9 Juli 2023
Bedienungsanleitung Messung
- Vemer
- Pancontrol
- Weidmüller
- Gima
- Zircon
- Livington
- Softing
- Bosch
- AstroAI
- GW Instek
- Eizo
- CEM
- SRS
- BENNING
- Seaward
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025