Dell PowerConnect 2748 Bedienungsanleitung

Lies die bedienungsanleitung für Dell PowerConnect 2748 (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 24 Bewertungen. Hast du eine Frage zu Dell PowerConnect 2748 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

www.del l. com | s upport .dell. com

Enabling Web-Managed Mode for

DellTM PowerConnectTM 2708, 2716, and 2724

NOTE: The PowerConnect 27xx switches are shipped as unmanaged switches. If you want to take

advantage of the management features of this switch, follow the procedures below.

NOTE: When changing between the unmanaged and Web-managed modes, the switch is reset

to the factory default settings.

NOTE: For more information on the management capabilities of the switch, see the

Dell PowerConnect 27xx Systems User's Guide.

NOTE: All PowerConnect 27xx series switches have the same default IP address. It is advisable

to change the IP address of each switch that has been set up as a Web-managed switch.

Enabling Web-Managed Mode

After powering up your switch according to the instructions in the User’s Guide, press the

Managed Mode

button once. The switch changes to Web-managed mode and the

Managed Mode

LED will be illuminated green.

NOTE: The Managed Mode button is a toggle button located on the front panel and is recessed

to prevent accidental mode changes.

NOTE: The Managed Mode LED is not illuminated when the switch is in unmanaged mode.

When changing to the Web-managed mode, the switch is configured with a default IP address

(192.168.2.1) and a default user login (User Name: admin and no password). In this mode, you can

configure the switch using a Web interface.

NOTE: To access the device through the Web interface, see "Initial Configuration" in

Dell PowerConnect 27xx Systems User's Guide

Logging In And Changing Switch IP Address and Password

You can update the switch IP Address either:

•Manually, or

•By enabling DHCP Addressing

NOTE: To update the IP address, see "Viewing System IP Address" in Dell PowerConnect 27xx Systems

User's Guide.

NOTE: For security reasons, we recommend that you follow the steps in the User’s Guide for changing

the password.

March 2005

Produktspezifikationen