Denver MBP-16W Bedienungsanleitung

Lies die bedienungsanleitung für Denver MBP-16W (1 Seiten) kostenlos online; sie gehört zur Kategorie Etikettendrucker. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 5 Bewertungen. Hast du eine Frage zu Denver MBP-16W oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

65.5mm

93mm

MBP-16W

denver.eu

12/2025

Please read the safety instructions carefully before using the

product for the first time and keep the instructions for

future reference.

1. Warning: This product includes lithium polymer batteries.

2. Small parts: Keep product out of reach for toddlers under

3 years to avoid swallowing.

3. Product operating and storage temperature is from 0

degree Celsius to 40 degree Celsius. Under and over this

temperature might affect the function.

4. Never open the product. Touching the inside electrics can

cause electric shock. Repairs or service should only be

performed by qualified personnel.

5. Do not expose to heat, water, moisture, direct sunlight!

6. The unit is not waterproof. If water or foreign objects enter

the unit, it may result in fire or electric shock. If water or a

foreign object enters the unit, stop use immediately.

7. Bluetooth wireless technology operates within a range of

about 10 m (30 feet). The maximum communication

distance may vary depending on the presence of obstacles

(people, metal objects, walls, etc.) or the electromagnetic

environment.

8. Only charge with supplied USB cable.

Safety Information page

Reset key:When the printer is not responding, try inserting

the insulated needles/toothpicks into the reset hole until the

power indicator light goes off and the device shuts down. If

needed, press and hold for 2 seconds to turn on the device.

How to use the product

- Power product on/off by press and hold the power button

for 2 seconds.

- Press power button twice to print diagnostic page and the

QR code to connect the printer with smart phone App.

Product overview

Please notice - All products are subject to change without any notice.

We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

Charging Introduction

Please connect one end of the USB cable to the device and

the other end to a 5V/2A adapter or computer USB port for

charging.

Charge time: about 3 hours.

Indicator Light

Light steady on: Bluetooth connected.

Light flashing slowly: Bluetooth disconnected.

Green light on: Normal use status/fully charged.

Red light on: Cover open/no paper/overheat.

Yellow light on: Low battery, please charge

Yellow light flashing quickly: Charging

Note: Auto power off: The printer will automatically power

off after 20 minutes without operation. You can set the

timer in the App.

How to use: Usage overview

1. IOS: Turn on Bluetooth, allow AiYin App to access.

Android: Turn on Bluetooth and Location, allow AiYin App to

access.

2. Open AiYin App and and Tap device icon in the upper left

corner, Connect the thermal printer device Bluetooth name

MBP-16W.

3. Tap the paper type and paper width. Choose the paper

type and paper width. Tap save. (if you need to customize the

paper width enter the number in last row.)

4. Choose the printing option.

How to use: App Download

1. Search for [AiYin] on Google Play or App Store.

Note:

- This product needs to be connected to the printer in the

APP;

- Due to the requirements of mobile phone system, the

Android mobile phone will use the user's geographic location

when connecting, so that the user needs to turn on the GPS

and confirm the authorization;

- This app only supports phones with Android 7.0 or above

systems.

Paper Installation Guide

1. Open cover

Lift the upper cover to open the lid

Electric and electronic equipment and included batteries

contains materials, components and substances that can be

hazardous to your health and the environment, if the waste

material (discarded electric and electronic equipment and

batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked

with the crossed out trash can symbol, seen above. This

symbol signifies that electric and electronic equipment and

batteries should not be disposed of with other household

waste, but should be disposed of separately.

As the end user it is important that you submit your used

batteries to the appropriate and designated facility. In this

manner you make sure that the batteries are recycled in

accordance with legislature and will not harm the

environment.

All cities have established collection points, where electric and

electronic equipment and batteries can either be submitted free of

charge at recycling stations and other collection sites, or be

collected from the households. Additional information is available

at the technical department of your city.

Hereby, Denver A/S declares that the radio equipment type

MBP-16W is in compliance with Directive 2014/53/EU. The full text

of the RED declaration of conformity is available at the following

internet address: denver.eu and then click the search ICON on

topline of website. Write model number: MBP-16W. Now enter

product page, and RED directive is found under downloads/other

downloads. Alternatively, the QR code below can be scanned and

the file can be accessed directly.

Hereby, Denver A/S declares that this connected device is in

compliance with Data Act Regulation (EU) 2023/2854. The Data Act

(EU) 2023/2854 product data sheet is available at the following

internet address: denver.eu and then click the search ICON on

topline of website. Write model number: MBP-16W. Now enter

product page, and the Data Act (EU) 2023/2854 product data sheet

is found under downloads/other downloads. Alternatively, the QR

code below can be scanned and the file can be accessed directly.

Information on standby/off mode power consumption and power

management for products compliant with Commission Regulation

(EU) 2023/826 can be found at the following internet address:

denver.eu and then click the search ICON on topline of website.

Write model number: MBP-16W and enter the page.

Operating Frequency Range: 2402-2480 MHz

Max Output Power: 2.26dBm

DENVER A/S

Omega 5A, Soeften

DK-8382 Hinnerup

Denmark

www.denver.eu

www.facebook.com/denver.eu

ENG 1ENG 2ENG 4ENG 5ENG 6ENG 7ENG 8ENG 3

3. Close the cover

The end of the paper outlet needs to exceed

the paper outlet of the machine

Power button

Type-C charging port

in the App.

How to use: Usage overview

1. App Download 2. Printer Startup 3. Connected Printer

4. Installation Consumables 5. Edit Print

2. Scan the following QR code to down App.

2. Put paper in

The print side is facing up

Product specifications

Printing method

Resolution

Battery

Direct Thermal

203 dpi

1200mAh, 3.7V

denver.eu

facebook.com/denver.eu

Contact

Main contact point: contt.hq@deru acnve.e

Nordics

Headquarter

Denver A/S

Omega 5A, Soten ef

DK-8382 Hinnerup

Denmark

Phone: +45 86 22 61 00

(Push “1” for suppt) or

E-Mail

For tecical questions, plse write to: hnea

suort.hq@deer.eu ppnv

Germany

Denver Germany GmbH Service

Service Center

Max-Emanuel-Str. 4

936 Passau 40

Phone: +49 851 379 369 40

E-Mail

suorde@deer.eu ppt.nv

Monday - Thursday 09:00 - 16:30

Friday 09:00 - 14:00

For l other questions plse writalea

e to:

contact.hq@de.eu nver

Benelux

DENVER BENUX B.V. EL

Barwoutswaarder 13C+D

3449 HE Woerden

The Netherlands

Phone: 0900-3437623

E-Mail: suort.nl@denver.eu pp

Spain/Portugal

DENVER SPAIN S.A

Ronda Augustes y Louis Lumiere, nº 23 – nave

16

Parque Tecnológico

48PATERNA 690

Valencia (Spain)

Spain

Phone: +34 960 046 883

Mail: suort.es@deer.eu ppnv

Porgal: tu

Phone: +35 1255 240 294

E-Mail: denver.svice@satfiel.com er

Austa ri

Lurf Premium Service GmbH

Deutsctrae 1 hsss

1230 Wien

Phone: +43 1 9 3085 04

E-Mail: denverrfservice.at @lu

Poland

LetMeRepair Poland . z o.o. sp

ul. Czstochowska 140 ę

62-800 sz Kali

Phone: 62 75 38 092

E-Mail: denver-serviceetmepair.pl @ler

Godziny pracy: 8 – 18 (poniedziaek – piłątek)

If your country is not listed above,

please write an email to

contact.h[email protected]

Denver A/S

Omega 5A, Soten ef

DK-8382 Hinnerup

Denmark

Produktspezifikationen