Develop Ineo 5021i Bedienungsanleitung

Develop Drucker Ineo 5021i

Lies die bedienungsanleitung für Develop Ineo 5021i (2 Seiten) kostenlos online; sie gehört zur Kategorie Drucker. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 4 Bewertungen. Hast du eine Frage zu Develop Ineo 5021i oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Unpack the machine and check the components
Toner Cartridge and Imaging Unit
Assembly
(Installed in the machine)
AC Power Cord
Installation Safety Information
1
Remove the packing materials and re-install the toner cartridge and imaging unit assembly
Remove the orange part.
2
Load paper in the paper tray
Adjust the paper
guides.
Do not exceed this mark.
Discard the
silica gel pack.
3
Connect the power cord and turn the machine on
Back Front
NOTE:
The components included in the box may differ depending on your
country.
The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
The screens and images in this Installation show the ineo 5021i.
4
Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.
Setup Guide
Read the Safety Information first, then read this Setup Guide for the correct installation procedure.
*4821503100*
*4821503100*


Produktspezifikationen

Marke: Develop
Kategorie: Drucker
Modell: Ineo 5021i

Brauchst du Hilfe?

Wenn Sie Hilfe mit Develop Ineo 5021i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten