DeWalt DCH273 Bedienungsanleitung
DeWalt
Bohrmaschine
DCH273
Lies die bedienungsanleitung für DeWalt DCH273 (60 Seiten) kostenlos online; sie gehört zur Kategorie Bohrmaschine. Dieses Handbuch wurde von 130 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 65.5 Bewertungen. Hast du eine Frage zu DeWalt DCH273 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/60

DCH253, DCH273
Heavy-Duty 20V Max* Cordless Rotary Hammer
Perceuse à percussion haute résistance sans fil 20 V max*
Rotomartillo inalámbrico de 20 V Máx* para trabajo pesado
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contactus.
Pour toute question ou tout commentaire, nouscontacter.
Si tiene dudas o comentarios,contáctenos.
1-800-4-
D WALTe
• www.
D WALTe
.com
Final Page Size: 8.5 x 5.5"


1
English
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, result in will death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, result in could death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, result in may minor or moderateinjury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may propertydamage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
eWALT
TOOL, CALL US TOLL FREE AT: 1-800-4-
D WALTe
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the
instructionmanual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) powertool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
inviteaccidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
orfumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to losecontrol.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electricshock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
orgrounded.
c) Water Do not expose power tools to rain or wet conditions.
entering a power tool will increase the risk of electricshock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electricshock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electricshock.
f) If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electricshock.
Produktspezifikationen
Marke: | DeWalt |
Kategorie: | Bohrmaschine |
Modell: | DCH273 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit DeWalt DCH273 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bohrmaschine DeWalt
6 Juli 2025
16 Juni 2025
15 Juni 2025
10 Juni 2025
4 Dezember 2024
4 Dezember 2024
4 Dezember 2024
4 Dezember 2024
4 Dezember 2024
4 Dezember 2024
Bedienungsanleitung Bohrmaschine
- DURO
- Alpha Tools
- Stanley
- Meec Tools
- Toolcraft
- Robust
- Makita
- Ozito
- Hilti
- Dremel
- Delta
- Pattfield
- Silverline
- Metabo
- AEG
Neueste Bedienungsanleitung für -Kategorien-
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
27 Juli 2025
27 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025