Diamond Audio HX600.4D Bedienungsanleitung
Diamond Audio
Empfänger
HX600.4D
Lies die bedienungsanleitung für Diamond Audio HX600.4D (16 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Diamond Audio HX600.4D oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
MULTI-CHANNELS
HX400.2/HX480.4/HX600.4/HX1200.5D
HEX SERIESHEX SERIES
FEATURES
ABOUT THE DIAMOND AUDIO EXPERIENCE
POWER RATINGS
.
RMS Power (4 )Ω
RMS Power (2 )Ω
Bridged (mono 4 )Ω
Bridged (mono 2 )Ω
Bridged (stereo 4 )Ω
200 W X 2
350 W X 2
700 X 1
N/A
N/A
100 W X 4/480 X 1
150 W X 4/800 X 1
480 W X 1(sub output)
800 W X 1(sub output)
300 W X 2 (4 )/800 X 1(2 )Ω Ω
Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
4-Layer PCB Board with Balanced Differential Inputs
Full Range Class D IR Chipset
“SNAP” Capacitors used Throughout the Circuit
Audiophile Grade High Tolerance Components
Spring Steel FET Clips Provide a Cleaner Board Design
Illuminated Logo / Fully Concealed Mounting
Output Clip Indicators for Precise Set Up
Fine Tuned Fully Variable Crossovers and Phase Control
Top Mounted Controls for Convenient Amplifier Adjustment
400 W RMS
HX400.2
1200 W RMS
HX1200.5D
Congratulations, you have just purchased one of the finest mobile audio products on the
market. Diamond Audio products represent the latest advances in electronical and acoustical
technologies in sound reproduction for your vehicle. Diamond Audio products are designed,
developed, and engineered in the USA using the latest innovative materials and components
to provide the finest sound reproduction possible. Every Diamond Audio product has been
verified and tested to ensure the best sounding and most reliable product on the market, if
installed properly. Diamond Audio products will provide many years of the ultimate listening
experience.
Please note that prolonged exposure to sound pressure levels in excess of 100dB can cause
permanent hearing loss. Using Diamond Audio products can exceed that level so please
exercise restraint in its operation in order to preserve your ability to enjoy its high fidelity sound
for many years to come.
Diamond Audio recommends our products be professionally installed by an authorized
Diamond Audio dealer to achieve the best possible system recommendation and installation.
This will ensure a true Diamond Audio listening experience and sound you would expect from
Diamond Audio products. With proper validation, using a Diamond Audio Retailer for installation,
your newly purchased amplifier, Diamond Audio will extend the product warranty from one year
to Two Years!!
Go ahead, Hear the Music
TOTAL RMS POWER
120 W X 4
185 W X 4
370 X 2
N/A
370 W X 2
480 W RMS
HX480.4
160 W X 4
250 W X 4
500 X 2
N/A
500 W X 2
600 W RMS
HX600.4
Installation
WARNING:
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss.
Diamond Audio amplifiers can exceed that level so please exercise restraint when listening and enjoying your new amplifier.
GENERAL PRECAUTIONS
• This unit is designed for negative ground 12V DC operation only.
• Total system impedance must NOT be less than 2ohms, stereo configuration, or 2 ohm mono on HX1200.5D sub channel
• Avoid installing the unit where:
- It would be subject to high temperatures, such as from direct sunlight or hot air from the heater.
- It would be exposed to rain or moisture.
- It would be subject to dust or dirt.
• Do not cover the unit with carpet or wires.
• Do not use the unit with a weak auto battery. Optimum performance depends on a normal battery supply voltage.
• For safety reasons, keep the volume of your car audio system moderate while driving your vehicle so that you can still hear
normal traffic sounds outside your car.
• There is NO speaker level input connector, you can cut RCA’s and solder the wires and connect directly thru low level input(RCA)
MOUNTING PRECAUTIONS
Although Diamond Audio amplifiers incorporate heat sinks and protection circuits, mounting the amplifier in a tight space
without any air movement can still damage internal circuitry over time. Choose a location that provides adequate ventilation
around the amplifier. For easy system set-up, mount the amplifier so the side panel controls will be accessible after
installation. To increase thermal run times on low impedance loads, an additional fan is recommended, remember any moving
air across the amplifier will reduce heat.
In addition, observe the following precautions:
1. Using a felt pen mark the mounting hole locations.
2. Mounting the amplifier on carpet will significantly reduce air flow, resulting in reduced thermal run times.
3. Mount the amplifier on a solid surface. Avoid mounting to sub woofer enclosures or areas prone to vibration. Do not install
the amplifier on plastic or other combustible materials.
4. Prior to mounting the amplifier, make sure not to cut or drill into the fuel tank, fuel lines, brake lines (under chassis) or
electrical wiring.
WIRING PRECAUTIONS
1. Before installation, make sure the source unit power switch is in the OFF position.
2. Disconnect the negative (-) lead of the battery before making any power connections.
3. When making connections, be sure that each one is clean and secure. Insulate all of your connections. Failure to do so
may damage your equipment.
4. A secure clean ground connection is critical to the performance of your amplifier. Connect the ground directly to the car
chassis to minimize resistance and avoid any noise problems.
5. Add an external fuse on the amplifier’s positive (+) power lead and connect it as close as possible to the vehicle’s (+)
battery terminal. Use a rating that equals the total current consumption at full output of all amplifiers in the system. This
external fuse will protect the vehicle from short circuits that can cause a fire.
INSTALLATION - Pre Planning Section
3
Produktspezifikationen
| Marke: | Diamond Audio |
| Kategorie: | Empfänger |
| Modell: | HX600.4D |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Diamond Audio HX600.4D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Diamond Audio
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
Bedienungsanleitung Empfänger
- Cranborne Audio
- Technics
- Whistler
- MX Onda
- Lanzar
- ANKARO
- Lotronic
- SureCall
- Sirus
- Atoll
- DataVideo
- Dimavery
- Ram Audio
- Insignia
- Power Acoustik
Neueste Bedienungsanleitung für -Kategorien-
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
