Digi Connect SP and Wi-SP Bedienungsanleitung

Lies die bedienungsanleitung für Digi Connect SP and Wi-SP (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 12 Bewertungen. Hast du eine Frage zu Digi Connect SP and Wi-SP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick Start

Guide

Digi Connect® SPand Wi-SP

1Verifyyour components

Verify thatyou haveall included equipment. Ifany itemismissingordamaged, contactyoursupplier.

Included equipment

or

Required additional equipment

2Connect thehardware

Digi Connect SP:Digi Connect Wi-SP:

1.

2.

Connectthe power supplytothe powerconnector.

Connectthe Ethernetcable to the Ethernet port.

1.

2.

Connectthe power supplytothe powerconnector.

Connectthe Wi-Fiantenna to the antennaconnector.

3Download therequiredsoftware anddocumentation

1.Navigateto www.digi.com/products/serial-servers/wireless-serial-servers/digiconnectwisp,and clickthelinkundertheUtilitiesProductSupport tab.

2.Select your operating system.Alist ofavailable utilities foryouroperating system appears.

3.Download and run eithertheDeviceDiscoveryUtilityDigiPortAuthority- Remoteor .

Iftheserial portsforyourproductwill bemanaged usingDigi’sRealPortsoftware, download theRealPortdriver.

1.Navigateto www.digi.com/products/serial-servers/wireless-serial-servers/digiconnectwisp,and selectDrivers underthe ProductSupport tab.

2.Select your operating system.Alist ofavailable downloadsandreleasenotes foryour operatingsystemappears.

3.Downloadthe RealPortdriverandthe release notes.

Note ForMicrosoftWindowsoperatingsystems,unzip thedownload packageand run theexecutable.ForLinuxorUNIXoperatingsystems,followtheinstructionsin the

release notes.

Foradditional support,downloadproductsupportdocumentation.

1.Navigateto www.digi.com/products/serial-servers/wireless-serial-servers/digiconnectwisp.

2.Click the ProductSupport tab.

3.Navigatetotheproductdocumentationand otheravailableresourcesasneeded.

4Connect to thenetwork

Note Thissectionrequires serialterminalsoftware, suchas Hyperterm or PuTTY.Downloadone oftheseprogramsifyoudonothave one installed.

ConfigureDigi ConnectSP

Use the DigiDiscovery UtilityDigiPort Authority -Remoteorto discoverdeviceson yournetworkandopen theweb interface.

1.In thelistof discovered devices, selecttheDigi ConnectSPdevice.

2.UsingtheDigi Discovery Utility orDigi PortAuthority, configuretheIPaddressifnecessary.

3.Open the DigiConnect SPwebinterface.In the Device Discovery Utility,click Open web interface. In Digi PortAuthority-Remote, clickDevice Configuration.

4.Aloginpromptfor the webinterface appears. Enterthe defaultusername andpassword:root dbpsand.Continueto section 5.

ConfigureDigi ConnectWi-SP

There are two methods toconfigure thenetwork connectiononaDigiConnect Wi-SP.Use the methodyouprefer.

Method 1: Use anaccesspoint preconfigured withthe default SSIDofCONNECTwithnoencryptionand let the DigiConnectWi-SP associate toit.

1.Once the device hasassociated,usethe DigiDiscovery UtilityDigiPortAuthority- Remoteortodiscover devices onyour network andopenthe webinterface.

2.In thelistof discovered devices, selecttheDigi ConnectWi-SPdevice.

3.UsingtheDigi Discovery Utility orDigi PortAuthority, configuretheIPaddressifnecessary.

4.Open the DigiConnect Wi-SP webinterface. In the Device Discovery Utility,click Open web interface. In Digi PortAuthority-Remote, clickDevice Configuration.

5.Aloginpromptfor the webinterface appears.Enterthe defaultusername andpassword:root dbpsand.Continueto section5.

©2016Digi InternationalInc.

Digi, Digi International, andthe Digi logoaretrademarksorregistered trademarks in the United States and other countries worldwide. Allothertrademarksmentioned in this document are the

propertyoftheir respectiveowners.

Produktspezifikationen