DigiTech FreqOut Bedienungsanleitung

Lies die bedienungsanleitung für DigiTech FreqOut (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu DigiTech FreqOut oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Power Supply Connector:

Connect a Harman PS0913DC

power supply (sold separately)

to this connector.

HOW IT WORKS:

Momentary Switch:

Sets the operation of the

Footswitch. When set to the

“ON” position, the feedback

eect will only be enabled

as long as the Footswitch is

held down.

When set to the “OFF”

position, the feedback

eect will toggle between

enabled and bypassed

modes each time the

Footswitch is pressed.

Feedback LEDs:

These LEDs light from

the center LED out as the

feedback signal increases.

The rate of feedback is

controlled by the Onset

knob.

Dry Switch:

Turns the dry signal

path on or o when the

feedback eect is enabled.

Onset Knob (ring):

Sets the time it takes for

the feedback to grow to full

strength.

Type Knob:

Select from one of seven

feedback harmonic types

Gain Knob (center):

Controls the amount of

feedback signal that is mixed

in with the dry guitar signal.

Output:

Connect this output to the

input of a another pedal

or the input of your guitar

amp

Footswitch

Turns the eect on or o. This Footswitch can be

congured for momentary or latched operation

using the MOMENTARY switch.

Placement of the FreqOut:

We recommend making it the rst pedal in your

eects signal chain.

Input 1:

Connect your instrument to

this jack.

Setup of the FreqOut:

Set MOMENTARY to ON. Set DRY to OFF. Set GAIN and

ONSET to 12:00. Set TYPE to 3RD. Press and hold the

Footswitch to enable feedback. Release to stop feedback.

FreqOut |Natural Feedback Creator

Produktspezifikationen