Digitus Fast Ethernet USB 2.0 Bedienungsanleitung


Lies die bedienungsanleitung für Digitus Fast Ethernet USB 2.0 (24 Seiten) kostenlos online; sie gehört zur Kategorie Kabel für PCs und Peripheriegeräte. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 13 Bewertungen. Hast du eine Frage zu Digitus Fast Ethernet USB 2.0 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/24
USB 2.0 10/100M Fast Ethernet Adapter
User’s Manual
1. Introduction
The USB Ethernet 10/100 adapter performs good plug and play connection of PC peripherals out -side the box” and mark a
significant advance in desktop cable management. Using the USB Ethernet 10/100 adapter you can simplify your PC network
connections in the home, office and on the travel.
2. Product Features
 USB specification Ver. 2.0 compliant.
 Supports USB Suspend/Resume Function.
 High-Speed USB Device.
 Supports wakeup frame, link status change and magic packet wake-up .
 Supports 2000/ XP /2003
 Supports plug and play.
3. System Requirements
 IBM PC or compatible PC with 486DX-100 MHz CPU or higher
 Available USB port
 CD ROM drive-
 At least 16MB of DRAM
4. Installation of the USB Ethern adapter: et 10/100
Follow the steps on installing the USB Ethernet 10/100 adapter software
1. Power on your computer and make sure that the USB port is enable and working properly.
2. Insert the “USB 2.0 to Fast Ethernet Adapter” to the USB port , it will be identified and indicate“ Found New Hardware
Wizard”, please selectNo, not this time, click Next to continue.
3. Select “Install from a list or specific location (Advanced)”, and click “Next to continue.
4. Select Include this location in the search”, click Browse” and select the folder that contains driver for your hardware,
then click “OK”, pressNext” to continue .


Produktspezifikationen

Marke: Digitus
Kategorie: Kabel für PCs und Peripheriegeräte
Modell: Fast Ethernet USB 2.0

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus Fast Ethernet USB 2.0 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten