DJI Pro Wireless Receiver Bedienungsanleitung

DJI Nicht kategorisiert Pro Wireless Receiver

Lies die bedienungsanleitung für DJI Pro Wireless Receiver (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13 Bewertungen. Hast du eine Frage zu DJI Pro Wireless Receiver oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/13

2018.06

V1.0

DJI PRO Wireless Receiver

DJI 专业无线接收机

User Guide

使用说明

Disclaimer and Warning

Congratulations on purchasing your new DJI OSMO

TM product. The information

in this document affects your safety and your legal rights and responsibilities.

Read this entire document carefully to ensure proper configuration before

use. Failure to read and follow instructions and warnings in this document

may result in serious injury to yourself or others, damage to your DJI OSMO

product, or damage to other objects in the vicinity. This document and all other

collateral documents are subject to change at the sole discretion of DJI OSMO.

By using this product, you hereby signify that you have read this disclaimer

and warning carefully and that you understand and agree to abide by the terms

and conditions herein. You agree that you are solely responsible for your own

conduct while using this product, and for any consequences thereof. You agree

to use this product only for purposes that are proper and in accordance with all

applicable laws, rules, and regulations, and all terms, precautions, practices,

policies and guidelines DJI OSMO has made and may make available.

DJI OSMO accepts no liability for damage, injury or any legal responsibility

incurred directly or indirectly from the use of this product. The user shall

observe safe and lawful practices including, but not limited to, those set forth in

this document.

Notwithstanding above, your statutory rights under applicable national

legislation are not affected by this disclaimer.

OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated

as “DJI OSMO”) and its afliated companies. Names of products, brands,

etc., appearing in this document are trademarks or registered trademarks

of their respective owner companies. This product and document are

document shall be reproduced in any form without prior written consent of or

authorization from DJI OSMO.

In the Box

DJI Pro Wireless Receiver ×1 Antenna ×2

Ronin 2 UART to D-Bus Cable ×1 S-Bus Cable ×1

Introduction

The DJI Pro Wireless Receiver is designed to be used with DJI Force Pro,

Master Wheels, and other controllers, providing a maximum operating range of

3 km in ideal conditions (unobstructed and free of interference). It can operate

at either 2.4 GHz or 5.8 GHz and is compatible with the RONIN

TM 2, Ronin-S,

and third-party gimbals through an S-Bus connection.

1. Antenna

Relays control signals. Do not

obstruct the antenna during

operation.

2. Operating Frequency Switch

Switches the operating

frequency between 2.4 GHz

and 5.8 GHz. Please note that

certain regions do not support

devices operating in the

5.8GHz frequency band, make

sure the switch is toggled to

the 2.4 GHz position, otherwise

the wireless received cannot

be linked to the controller.

3. Link Button

Press and hold this button

for two seconds to link to the

controller.

4. Status LED

Indicates the system status.

5. Power and Communication Port

Connects to a gimbal using a

CAN Bus cable, S-Bus cable.

6. S-Bus/CAN Switch

Toggles between S-Bus and

CAN connections. Set the

switch to CAN when using

with a Ronin 2 or Ronin-S, and

set the switch to S-Bus when

using with an S-Bus gimbal.

7. USB-C Port

Used for activation and

rmware updates.

8. 1/4”-20 Mounting Hole

Used for mounting the

receiver.

9. M4 Mounting Hole

Used for mounting the

receiver.

Produktspezifikationen

Marke:	DJI
Kategorie:	Nicht kategorisiert
Modell:	Pro Wireless Receiver
Breite:	38 mm
Tiefe:	210 mm
Gewicht:	60 g
Produktfarbe:	Schwarz
Höhe:	19 mm
Betriebstemperatur:	-20 - 50 °C
Menge pro Packung:	1 Stück(e)
Audio Kanäle:	- Kanäle
Eingangsspannung:	5 - 15 V
Kompatibilität:	Ronin 2\nRonin-S\nDJI Force Pro\nDJI Master Wheels
Ausgangsleistung pro Kanal (20-20KHz@8 Ohm):	- W
Markenkompatibilität:	DJI