DOD Boneshaker Bedienungsanleitung


Lies die bedienungsanleitung für DOD Boneshaker (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 10 Bewertungen. Hast du eine Frage zu DOD Boneshaker oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
1 2 3
4 5 6
7
8
10
9
1. DISTORTION - adjusts the amount of distortion gain.
2. DEPTH - adjusts the low frequency growl’ of extended range instruments.
3. LEVEL - adjusts the overall output level of the distortion eect.
4. LOW - adjusts the low EQ frequency and its level.
5. MID - adjusts the mid EQ frequency and its level.
6. HIGH - adjusts the high EQ frequency and its level.
7. INPUT - connect your instrument here.
8. FOOTSWITCH - turns the eect on and o.
9. LED - turns on when the eect is enabled.
10. OUTPUT - connect to the next pedals input or to the input of your amplier.
USING BONESHAKER:
Most guitarists/bassists will favor placing the Boneshaker at the
beginning of their chain of eects, so start with that placement.
A typical eects signal chain will consist of Distortion eects rst
then Modulation
eects (Chorus, Flanger, Phaser, Tremolo, etc...) next and then
nally Time based eects (Delay and Reverb).
Placing the Boneshaker toward the front of your chain or eects
will preserve vibe no matter the pedal combination that follows.
You may wish to experiment with the eect placement since
Boneshaker also stacks well with other distortions and fuzz!
SPECIFICATIONS:
Input 1/4” TS Unbalanced - 470 kΩ
Output 1/4” TS Unbalanced - 100 Ω
Current Draw 20 mA
Bypass True Bypass
Power 9VDC alkaline battery (not included)
HARMAN PS200R power adapter (optional)
Warranty 1 Year
DOD
10653 River Front Parkway
South Jordan, UT 84095
USA
801-566-8800 Rev A - 6/15


Produktspezifikationen

Marke: DOD
Kategorie: Nicht kategorisiert
Modell: Boneshaker

Brauchst du Hilfe?

Wenn Sie Hilfe mit DOD Boneshaker benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten