Dormakaba ES96F Bedienungsanleitung
Dormakaba
Nicht kategorisiert
ES96F
Lies die bedienungsanleitung für Dormakaba ES96F (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 11 Bewertungen. Hast du eine Frage zu Dormakaba ES96F oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
F R A M E P R E P I N S T R UCTI O N S
E S 9 6 F
Electric Strikes
© 2020 dormakaba USA Inc
DORMA DRIVE, DRAWER AC, REAMSTOWN, PA 17567 PHONE: (800) 523-8483 (717) 336-3881 FAX: (717) 336-2106
EMAIL: archdw.us@dormakaba.com dormakaba.us WEBSITE:
PCN18035
R04-20GR
ISES96F_PREP
08281285
1. Place the folded template square to the frame. Horizontally align
holes marked on the template with the mounting holes in frame.
2. Peel adhesive backing and paste the folded template square to the
frame.
3. Carefully cut the frame inside the un-shaded area marked on the
template. Install strike per installation instructions 08281280.
For Cutting ANSI Prep Frames
NOTE: Specications subject to change without notice.
* Dimension F is measured from face of mounting tab to face of
frame.
** Dimension X on the drawing is determined by the vertical
centerline of the door. If the latch incorporates a deadlocking pin
additional steps will be necessary to ensure proper operation of the
deadlocking pin. Measure the thickness of the deadlocking pin and
add this thickness to Dimension X to relocate the vertical centerline an
appropriate distance on the frame.
Frame Prep Dimensions
z
MEASUREMENT
FRACTIONAL
INCHES
DECIMAL
INCHES
METRIC
mm
A 1-1/4” 1.250 31.75
B 4-7/8” 4.875 123.83
C 3-3/8” 3.375 85.73
DF + 1-7/16” F + 1.438 F + 36.51
E 3/8” 0.375 9.53
F 3/16”* 0.188* 4.76*
G 1-11/16” 1.688 42.86
X Vertical Centre Line of Door
Lock and Mounting Face Plate**
K 4-1/8” 4.125 104.78
M 12-24 N/A N/A
Z 3-5/16” 3.315 84.14
2
© 2020 dormakaba USA Inc
DORMA DRIVE, DRAWER AC, REAMSTOWN, PA 17567 PHONE: (800) 523-8483 (717) 336-3881 FAX: (717) 336-2106
EMAIL: archdw.us@dormakaba.com dormakaba.us WEBSITE:
1. Mark the horizontal Lock Body Centerline on the door.
Close the door and transfer the Lock Body Centerline to the
frame.
If the door isn’t ush to the frame in the closed position, mark
the depth of the closed door on the frame. Measure half of the
door thickness back toward the door stop and mark the vertical
Door Centerline on the frame.
2. Horizontally align the proper Template Lock Centerline with
the Lock Body Centerline marked on the frame. Peel adhesive
backing and paste the folded template square to the frame.
If the door isn’t ush to the frame when closed, tear the
template at the fold line. Align the faceplate portion vertically
with the Door Centerline and match the template Lock
Centerline with the Lock Body Centerline marked on the frame.
Carefully paste the front portion of the template on face of
frame to align with the faceplate portion.
3. Carefully cut the frame inside the un-shaded area marked on
the template.
Follow Mounting Tab Installation Instructions.
For Cutting Frames without ANSI Prep
2
Frame
Self-Adhesive
Mounting Shim
(4 incl.)
Mounting bTa
(2 incl.)
12-24 Machine
Screws (2 Per Tab)
a) Fasten the mounting tabs to the faceplate of the strike,
selecting the appropriate shims for the installation.
b) Using the assembled strike and tabs as a template, place against the
frame and mark the mounting hole locations. Remove and drill a 3/16”
hole in frame for each mounting tab and countersink the frame.
c) Remove the tabs from the faceplate and install in the frame using the
12-24 x 3/8” machine screws supplied. Tabs are plated and drilled and
tapped for this purpose.
d) Install strike per installation instructions, 08281280.
Produktspezifikationen
| Marke: | Dormakaba |
| Kategorie: | Nicht kategorisiert |
| Modell: | ES96F |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Dormakaba ES96F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Dormakaba
22 August 2024
22 August 2024
22 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Nicht kategorisiert
- Scancool
- Elektra Bregenz
- Sunset
- Habitat
- Turbo Scrub
- Whirlpool
- Fizzics
- Marvel
- Ilford
- Ruger
- KWC
- Bellari
- TDE Instruments
- Virax
- Coolado
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025