Dormakaba HTS-E01 Bedienungsanleitung


Lies die bedienungsanleitung für Dormakaba HTS-E01 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 11 Bewertungen. Hast du eine Frage zu Dormakaba HTS-E01 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Subject to change without notice
HTS-E01
Waist height turnstiles
Note
Dimensions are shown as
inches followed by millimeters;
for example, 1" (25).
HTS-E01 elevation drawings
Standard units HTS-E01
Construction
Material AISI 304 stainless steel.
Side barrier elements Made of AISI 304 stainless steel tubing Ø1-7/8" (Ø48 mm),
mitered.
Rotating units With tubular column Ø5-1/2" (Ø140 mm) made of AISI 304
stainless steel.
With three U-shaped barrier elements made of AISI 304 stainless
steel tubing Ø1-9/16" (Ø40 mm).
Locking system, drive and toothed clutch installed in tubular
column.
Finish Stainless steel satin finish.
Function Power assist; servo-positioning drive/electrically controlled in 2
directions.
Passage side can be selected - inwards right or inwards left.
Electrical equipment Control unit in external switch cabinet:
H 11-1/8" × W 6-5/8" × D 4-1/2" (H 283 mm × W 168 mm × D 115 mm).
Power supply 110 – 230 VAC, 50/60 Hz, 253 VA.
In case of power failure both directions free
Standby power consumption 15 VA.
Installation Finished floor.
Suitable for outdoor installation.
Protection classes Housing IP43, components conducting supply voltage IP54.
Ø1-7/8"
(Ø48)
Ø5-1/2"
(Ø140)
12-5/8"
(320) 35-7/16"
(900)
40-1/4"
(1023)
22-3/8"
(568)
58-11/16"
(1491)
29-1/8"
(740)
29-9/16"
(751)
18 /8"-7
(480)
18 /8"-7
(480)
Ø51-3/16"
(Ø1300)
42-1/8"
(1070)


Produktspezifikationen

Marke: Dormakaba
Kategorie: Nicht kategorisiert
Modell: HTS-E01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dormakaba HTS-E01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten