Dormakaba La Gard 3125 Bedienungsanleitung

Lies die bedienungsanleitung für Dormakaba La Gard 3125 (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 14 Bewertungen. Hast du eine Frage zu Dormakaba La Gard 3125 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

(P/N) 741.049 Rev A EN 06/10 • © copyright 2010 Kaba Mas LLC

page 1 of 13

AUDITGARD

66E (LGA) Electronic Combination Lock

SOFTWARE INSTALLATION INSTRUCTIONS

IMPLEMENTATION PACKAGE

The AuditGard Software implementation package includes:

• 707013 AuditGard Software Install CD

• 42145 Programming/Audit cable (3125 Entry Device)

• 43097 Programming/Audit cable (for 3190, 3750-K, and 8130 Entry Devices)

• 707010 USB Interface Adapter (or 42150 Serial Interface Adapter)

IMPORTANT NOTE:The system driver for the USB Interface Adapter will be installed after the application software. DO NOT

insert the adapter into the PC until the software installation is complete.

If any of the above items are missing, contact your point of sale.

SYSTEM REQUIREMENTS

Minimum hardware and software requirements for the AuditGard Software:

• IBM compatible PC (Intel® Pentium® 4 or compatible processor) capable of running Windows® with an available USB or serial port

• 512 MB RAM (1GB preferred. Refer to your operating system requirements.)

• CD-ROM or DVD-ROM Drive

• Hard Disk Drive with at least 6.5 MB available

• Super VGA (1,024x768) or higher-resolution video adapter and monitor

• Windows XP Professional 32-bit (Service Pack 3 or greater), Windows Vista 32-bit or 64-bit (Business Edition), and Windows 7

Professional 32-bit or 64-bit

• Microsoft Mouse or compatible pointing device

NOTE: Adobe® Reader requires an additional 335 MB of available hard-disk space and Microsoft Internet Explorer 6.0 or higher.

SOFTWARE INSTALLATION AND SETUP

1. Insert the AuditGard Install CD into the appropriate CD-ROM or DVD-ROM drive of the PC.

NOTE: Do not remove the Installation CD until instructed to do so.

2. The Install CD is set to AutoRun. If AutoRun does not initiate, complete the following steps:

a. Select the icon in the lower left of the Windows screen.Start

b. Select the icon from the Windows menu. The Run Window will be displayed (Figure 1). Run

c. If necessary, change the path to point to the drive being used to install the software.

d. Click on the button.OK

NOTE: An alternate method to initiate the Installation Browser is to right-click on the START Explore button, select to open

your CD-ROM drive, and then select Launch.exe.

Figure 1.

Produktspezifikationen