Draper 02514 Bedienungsanleitung
Lies die bedienungsanleitung für Draper 02514 (8 Seiten) kostenlos online; sie gehört zur Kategorie Schweißer. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Draper 02514 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
AUTO DARKENING
WELDING
HELMET
02513, 02514, 02515.
These instructions accompanying the product are the original instructions. This document is part of the
product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all
these instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of
the product.
Whilst every eort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modications without prior warning.
1. INTRODUCTION
1.1 SCOPE
Professional users helmet with solar powered
automatic shading facilities when arc is struck. Also
features a dedicated grinding setting.
Suitable for enthusiasts and tradespersons alike. Any
application other than that it was intended for, is
considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge, or people unfamiliar with these
instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk
of damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Warning!
Read the instruction manual.
Warning!
Wear suitable welding eye/face
protection.
Warning!
Wear ear defenders (During grinding
operations).
Warning!
Wear protective gloves.
Keep out of the reach of children.
Warning!
Danger of fumes.
Danger of ultraviolet radiation.
Danger of burning splashes.
Power source.
Shade level.
Lens switching time.
Lens size.
Tig welding.
Mig welding.
Arc welding.
Grinding.
Plasma cutting.
Replaceable battery.
Operating temperature.
Arc sensors.
Helmet weight.
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Do not incinerate or throw
onto re.
–
2
–
–
3
–
For indoor use only.
Do not expose to rain.
UK Conformity Assessed.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock Nos. 02513, 02514, 02515 ...................................
Part Nos. .................. WHVS-RF, WHVS-BS, WHVS-PC
Tig, Mig & Arc and Grinding & Plasma Cutting .............
.......Permanent protection against UV and IR radiation
Lens size 92.5 x 42.5mm ................................................
Power supply Li-ion & solar ............................................
Replaceable battery .........................................600mAh
Shades level 4, 9-13 ........................................................
Adjustable shade .................................................... 9-13
Lens switching time ........................................ 3/10000s
Sensitivity control Rotary dial .........................................
Operating temperature -5°C to +55°C...........................
Weight 0.440kg ...............................................................
3. HEALTH AND SAFETY
INFORMATION
3.1 GENERAL SAFETY
INSTRUCTIONS FOR WELDING
HELMETS
Warning! Read all safety warnings and all
instructions.
−Severe burns are possible with a damaged lens
(cracks, pits and holes etc.). Do not use damaged
lenses.
−Optical radiation can possibly enter in from behind
the helmet from other welders welding in the
immediate area.
−This helmet is not designed to protect against
severe impact, explosives or fragments from
spinning wheels on abrasive discs.
−Do not weld in the light state.
− If lter fails to turn dark. Immediately stop welding.
−Do not use in an excessive heat environment.
−Ensure that the sensors are kept clean.
Personal Protection:
– The body should be protected by suitable clothing.
– The use of neck protection may be necessary
against reected radiation.
– Wear safety glasses when chipping, wire brushing,
grinding, or when near cooling welds as metal
lings or slag can be thrown up. Fully enclosed
goggles are advisable.
– The UV and IR radiation generated by welding is
highly damaging to the eye, causing burns. This
can also aect the skin. Protect the eyes and face.
– Where environments are subject to pedestrians
and trac ensure a protective screen is used to
avoid accidental arc glare.
- Do not weld in the vicinity of children or animals
and ensure no one is looking before striking up.
– In the welding environment, damaging levels of
noise can exist. Wear hearing protection if the
process dictates.
– Do not touch hot equipment or metal. Allow the
weld time to cool, use the correct tool and wear
protective welding gauntlets.
– Wear ame retardant clothing (leather, wool, etc.).
– The arc generates
• ultra-violet radiation (can damage skin and eyes).
• visible light (can dazzle eyes and impair vision).
• infra-red (heat) radiation (can damage skin and
eyes).
– Such radiation can be direct or reected from
surfaces such as bright metals and light coloured
objects.
– In the vicinity of an arc, non-reective curtains or
screens shall be used to isolate persons from
the arc
radiation. A warning, e.g. a symbol for eye protection,
should refer to the hazard of arc radiation.
4. UNPACKING AND
CHECKING
4.1 PACKAGING
Carefully remove the product from the packaging and
examine it for any sign of damage. Check contents
against the parts shown in Fig A. If any part is damaged
or missing, please contact the Draper Help Line (see
back page). Do not attempt to use the product!
The packaging material should be retained during the
warranty period, in case the product needs to be
returned for repair.
Warning!
• Some of the packaging materials may be harmful
to children. Do not leave any of these materials in
reach of children.
• If any of the packaging is to be thrown away, make
sure they are disposed of correctly, according to
local regulations.
Produktspezifikationen
| Marke: | Draper |
| Kategorie: | Schweißer |
| Modell: | 02514 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Draper 02514 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schweißer Draper
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Schweißer
- MKC
- GYS
- Parkside
- Stamos
- Herkules
- Taurus
- Dedra
- Einhell
- Hyundai
- Topcraft
- Telwin
- ROWI
- THUN
- Güde
- Stanley
Neueste Bedienungsanleitung für -Kategorien-
9 Juli 2025
9 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025