Draper 09443 Bedienungsanleitung


Lies die bedienungsanleitung für Draper 09443 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Draper 09443 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
09443
EN
Original Instructions
Version 1
June 2024
16 PIECE
PNEUMATIC
WIND BACK KIT
Stock No: 09443
Part No: PWBK-16
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
This air-powered wind-back kit is designed to adjust the pistons
on front and back braking systems when servicing braking
systems or replacing brake pads. The tool is suitable for
operating left and right threaded pistons, and the magnetic tip
will hold adapters in place. The kit has 15 adapters suitable for
servicing most car types.
Any other application beyond the conditions established for use
will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
This product is suitable for use by enthusiasts and
tradespersons alike.
2. Specication
Stock No. 09443
Part No. PWBK-16
Working air pressure: 5-8bar
Net weight: 3.2kg
3. Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
injury or damage to the user, the product or the vehicle.
WARNING! Ensure Health and Safety, local authority
and general workshop practice regulations are
adhered to when using tools and equipment.
• ALWAYS follow the vehicle manufacturers
instructions, warnings and service procedures.
• This tool should only be used by qualied trained
personnel.
• Ensure the correct air pressure is maintained and DO
NOT exceed the maximum specied of 8 bars.
•  Keep this tool in good working order and condition.
DO NOT operate if any parts are damaged or missing
as this may cause failure and/or personal injury.
• DO NOT use the kit to perform a task for which it is not
designed.
• ALWAYS wear suitable eye and hand protection.
4. Identication
1. Piston rotation lever
2. Air pressure trigger
3. Lever release button
4. Push spindle
5. Magnetic adaptor holder
6. 15 Brake piston winder adaptors (Refer to chart Section 5)
7. Storage box
8. Air supply connector (1/4 BSP)
4.1 Packaging
Keep the product packaging for the duration of the
warranty period in case the product needs to be returned
for repair.
WARNING! Keep packaging materials out of reach
of children. Dispose of packaging correctly and
responsibly and in accordance with local
regulations.
Please visit for our full range of drapertools.com
accessories and consumables.
Preface
2
(4)
(7)
(5)(3)
(6)
(1)
(2)
(8)
5. Adaptors Usage
Note: Each adaptor is marked with the relevant code
number or letter – refer to the chart for vehicle usage
information.
Brake
Piston
Winder
Adaptor
Car Make Usage
0 GM Most 2-1/2” diameter pistons (Seville/Eldored 79)
2 Citroën
Honda
XM, Xantia (F/R)
3 Audi (F)
Fiat
Alfa Romeo (F)
Ford
Isuzu (F)
Honda
Jaguar
BMW
Mercedes Benz
Mitsubishi
Nissan
Rover
Toyota
Volvo (F)
VW
Fiesta (F)
Concesto (F)
XJ6, XJ40 (F/R)
318is, 320i, 325TD, 518i, 525i, 1x, 740i, 850ci,
M5 (F)
190, 200, 300, 420, 560 series (F)
Colt (F)
Miera, Stanza, Sunny (F)
Austin, Metro 200 & 400 series, Maestra, Montego
(F)
Camry (F)
Passat, Golf GTI (F)
4 Ford
Mazda ( R)
SAAB
Toyota
Fiat
Alfa Romeo
Honda
GM
(Australia, NZ Telstar)
9000 (R), Lumina
164 2.0 (R)
Prelude, CRS 16i
Saturn (R), Grand Prix
5 3/8” adapter
6 Nissan
VW
Primera
Golf IV
7 Audi
Rover
Subaru
Ford
Nissan
Peugeot
Toyota
VW
Citroën
Alfa Romeo
Fiat
Honda
Jaguar
Renault
SAAB
Seat
Lancia
80, 90, V8+100, Coupe E (R)
800 ABS
L+Z (R)
Sierra ABS, Granada, Scorpio ABS 85 (R)
Bluebird 1.8 Turbo, Silvia Turbo, Primera 2.0i LS/
GS/GSX (R)
405 1.9Gi, Gri, Sri, Gtxi, MI 16, 605 2.0Sri (R)
Celica, Corolla GT, MR2 (R)
Golf Gti, Jeta Synchro, Jetta Gti 16V, Passat CL,
GL, GT, GT 16V, Corrado 16V Scirroca GTX 16V (R)
8 GM Most 1-7/8” diameter pistons
9 GM Most 2-1/8” diameter pistons
A (Z) Renault R21, Laguna (R)
E Nissan
Ford
Maximas
F(G) Opel (R)
K Citroën
Brake
Piston
Winder
Adaptor
Car Make Usage
M Ford
Mini
Mazda
Motors
R68
Mazda 3
N SAAB
Honda
Alfa Romeo
AUDI
VW
Lancia
6. Operation
1. Select an adaptor suitable for the brake caliper piston
being worked on. Fit the adaptor onto the magnetic
holder (5). Connect the tool to the compressed air
supply using the connector (8).
• Ensure that the air pressure is set correctly and does
not exceed 8 bars.
2. Press the release button (3) and turn the rotation lever
(1) to move the push spindle (4) forward or backward
to t the tool into the caliper.
3. Then press the trigger (2) and rotate the lever (1) to
rotate and push the piston back.
4. After pushing the brake piston backward, press the
lever button (3) to release the tool from the piston.
7. Maintenance, Storage and
Disposal
After use, clean and store in the storage case supplied in
a cool, dry, childproof area.
At the end of its working life, dispose of the product
responsibly and in line with local regulations. Recycle
where possible.
8. Warranty
6months
Visit for full details.drapertools.com/warranty
3


Produktspezifikationen

Marke: Draper
Kategorie: Nicht kategorisiert
Modell: 09443

Brauchst du Hilfe?

Wenn Sie Hilfe mit Draper 09443 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten