Draper 09951 Bedienungsanleitung
Lies die bedienungsanleitung für Draper 09951 (3 Seiten) kostenlos online; sie gehört zur Kategorie Werkbank. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Draper 09951 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
EN
09951
WORKBENCH
TILT AND CLAMP FOLD DOWN
Original Instructions
Version 3 – February 2025
No. Part Description Qty
(1) Worktops 2
(2) Slide Base 2
(3) M8 Bolts 4
(4) Crossbars 2
(5) Leg Frames 2
(6) Plastic Feet 4
(7)
8mm
Washers
8
Intended Use
This light weight portable workbench is designed for use
as a worksurface or saw horse and is suitable for a variety
of clamping operations.
Any other application beyond the conditions established
for use will be considered misuse. Draper Tools accepts
no responsibility for improper use of this product.
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
Specication
Stock No. 09951
Part No. WBTT600Y
Maximum Load Capacity 100kg
Maximum Clamp Opening 275mm
Clamping Tilt Angles 0°, 45° and 90°
Dimensions 600 x 635 x 800mm
Net Weight (approx.) 6.1kg
Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may
result in injury or damage to the user, the product or
the workpiece.
• Observe all standard safety precautions and good
practices when in a workshop environment.
• Read all the safety information associated with any
tools to be used in conjunction with this workbench.
• Use all appropriate personal protective equipment
when working with tools.
• Be mindful that tools that may damage the workbench
frame or work surface if used carelessly.
• Before every use, inspect the workbench for broken,
cracked, loose or corroded parts.
• Important: DO NOT use this product if it is damaged
or its structural integrity is compromised.
• Ensure that the workbench is fully assembled, opened
and tightened before use, with the folding braces
locked in place.
• Ensure that the workbench is positioned on rm and
level ground while it is in use.
• DO NOT use the workbench on slippery or wet
surfaces.
• DO NOT climb or stand on the workbench.
• exceed the rated weight limit.DO NOT
• DO NOT store heavy loads on the workbench for
extended periods.
• Position the workpiece so that the weight is evenly
distributed and does not overbalance the workbench.
• NEVER clamp or mount tools to the workbench.
• expose the product to rain or wet DO NOT
environments.
• Take care when lifting or moving the workbench.
• Store the workbench in a clean and dry location, out
of direct sunlight and out of reach of children.
CAUTION!
DO NOT overtighten the clamps.
Please visit for our full range of drapertools.com
accessories and consumables.
Identication
Carefully remove the product from the packaging and
examine it for any signs of damage that may have
occurred during shipment. Check against parts list below
© Published by Draper Tools Limited© Published by Draper Tools Limited
Delta International
Delta International BV
Oude Graaf 8
6002 NL
Weert
Netherlands
Contact Details
Draper Tools
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Email: sales@drapertools.com
Product Helpline: +44 (0) 23 8049 4344
Telephone Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
Please contact the Draper Tools Product Helpline for repair and servicing enquiries.
Produktspezifikationen
| Marke: | Draper |
| Kategorie: | Werkbank |
| Modell: | 09951 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Draper 09951 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Werkbank Draper
11 Juli 2025
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Werkbank
Neueste Bedienungsanleitung für -Kategorien-
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
22 August 2024
18 August 2024
17 August 2024
9 August 2024