DS18 JK-SQBASSHARNESS Bedienungsanleitung

DS18 Nicht kategorisiert JK-SQBASSHARNESS

Lies die bedienungsanleitung für DS18 JK-SQBASSHARNESS (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu DS18 JK-SQBASSHARNESS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
JK-SQBASSHARNESS
USER MANUAL
A. Pin Remover
B. #2 Philips Screwdriver
C. ¼ Drill Bit
D. 7mm Socket
E .10mm Socket
F. 18mm Socket
G. T27 Socket
I. Impact wrench
Equipment you will need
(Not included in the kit)
•SQBASS (Active subwoofer)
SQBASS Brackets Wiring Harness
X-4, M5x16mm
screws, and nuts
X-4, 2x8mm screws
JK-SQBASSHARNESS
for JEEP: SERIES
Item included:
Tools required:
A
A
B
B
1
ATTENTION
Installation of mobile audio and video components requires experience with a variety of
mechanical and electrical procedures. Although this manual provides general installation and
operation instructions, it does not show the exact installation methods for your vehicle. If you
do not have the required knowledge and experience to successfully complete the installation,
consult an authorized dealer about professional installation service.
ATTENTION
Disconnect the negative post (Ground) of the battery before you start the installation. This
helps avoid airbags coding and malfunctions, codes module malfunction or any electrical
issues
Under Seat SQBass Rack/Bracket
installation
1
2
Remove the belt screw from the seat using a T40 socket, then you can remove the seat from
the Jeep and put it on this position for easy access under the seat.
Starts with removing the bolts of the Driver seat using the 18mm socket with an impact
wrench tool.
2


Produktspezifikationen

Marke: DS18
Kategorie: Nicht kategorisiert
Modell: JK-SQBASSHARNESS

Brauchst du Hilfe?

Wenn Sie Hilfe mit DS18 JK-SQBASSHARNESS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten