DSC WS4949 Bedienungsanleitung

DSC Fernbedienung WS4949

Lies die bedienungsanleitung für DSC WS4949 (7 Seiten) kostenlos online; sie gehört zur Kategorie Fernbedienung. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu DSC WS4949 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/7

WS4949 Wireless Panic Button

Operating Instructions

Introduction

The WS4949 is a 2 button, 3 function remote that can be

used to arm and disarm as well as a variety of other

remote functions. Please discuss all WS4949 options with

your installer in order to program the best possible com-

bination to suit your needs.

NOTE: Signals will not be received if the key is not within the

range of the wireless receiver.

Operation of the WS4949

To activate function 1 or 2 press and hold the appropriate

button for approximately 1 second. For function 3 press and hold both buttons for approxi-

mately 3 seconds. The LED located between buttons 1 and 2 will light up indicating a sig-

nal has been sent to the control panel receiver. The typical functions are as follows:

Away Arming

Press this button to arm your system in the Away mode. Both the interior and

exterior zones will be armed, allowing you to exit the premises.

Disarm

Press this button to disarm your system. You do not have to enter your access

code when you use the key to disarm the system.

Panic

Press and hold both buttons to notify your central monitoring station of a situation

requiring the police, such as a break-in (requires a monitored account).

NOTE: By default, the user must press and hold the buttons for 3 seconds to activate the panic function.

How to Enroll the WS4949

This section describes how to set up and program your remote and should be done by the

installer. When programming the functions keys in the receiver, Function Key #1 is not used

for the WS4949.

• Button 1 (Left Button) sends Function Key #2

• Button 2 (Right Button) sends Function Key #3

• Both buttons pressed simultaneously and held for 3 seconds sends Function Key #4

The following outlines the basic steps for programming and enrolling this device on

PowerSeries receivers. For additional options or for other receivers please refer to the

specific receiver installation manuals.

Step 1 - Program Electronic Serial Number (ESN)

Section [804], subsections [41] - [56]

[41] Key #1 |______|______|______|______|______|______| . . . [56] Key #16 |______|______|______|______|______|______|

Step 2 - Program Function Buttons

Section [804], subsections [59] - [60]

For the RF5501-433 v5.0 Receiver, Section [804], subsections [61] - [68]*

Button 1 Button 2

Produktspezifikationen

Marke:	DSC
Kategorie:	Fernbedienung
Modell:	WS4949
Schutzfunktion:	Wasserfest
Breite:	32 mm
Tiefe:	13 mm
Gewicht:	18 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	CR2025
Akku-/Batterietechnologie:	Lithium
Höhe:	57 mm
Eingebautes Display:	Nein
Betriebstemperatur:	0 - 49 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 93 %
Menge pro Packung:	1 Stück(e)
Akku-/Batteriespannung:	3 V
Knopfanzahl:	4
Funkfrequenz:	433 MHz
Markenkompatibilität:	DSC
Maximale Reichweite:	- m
Wiederaufladbar:	Nein
Beleuchtete Tasten:	Nein
Eingebaute Batterie:	Nein
Fernbedienung Nutzung:	Sicherheitssystem
Eingangssignal:	Drucktasten