Edgewater EdgeMarc 4562T4W Bedienungsanleitung

Edgewater Router EdgeMarc 4562T4W

Lies die bedienungsanleitung für Edgewater EdgeMarc 4562T4W (7 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 11 Bewertungen. Hast du eine Frage zu Edgewater EdgeMarc 4562T4W oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
4562 Converged
Networking Router
Quick Start Guide
Version 1.0
Page 1 of 7
200-4562-001
Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Additional configuration needed to deploy the device in a
specific environment can be performed with the help of online help.
This guide also provides an example of a typical 4562 deployment that
can be used as a guideline for your installation.
Requirements for Installation
A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
At least one Ethernet cable
Following information supplied by the VoIP Service Provider
o IP address of the WAN interface
o if T1 is being used for WAN connection then:
T1 frame format
Layer 2 protocol such as PPP, Frame Relay/DLCIs, HDLC,
etc.
o IP address of the Softswitch
Page 2 of 7
Instructions
Step 1 Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of 4562. This port can be seen
in the area “B” of the above diagram. Connect the other end of the cable to your
computer’s Ethernet port.
2. If T1 is used for the WAN connectivity then perform the following steps, otherwise go to
step 5.
Page 3 of 7


Produktspezifikationen

Marke: Edgewater
Kategorie: Router
Modell: EdgeMarc 4562T4W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edgewater EdgeMarc 4562T4W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten