Edifier M20 Bedienungsanleitung
Edifier
Lautsprecher
M20
Lies die bedienungsanleitung für Edifier M20 (7 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 24 Bewertungen. Hast du eine Frage zu Edifier M20 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
LEARN MORE
M20™ and M50™
TAKE A GOOD LOOK
Your headset may look
slightly different than the
illustration, but will still
work as described.
MICRO USB CHARGING PORT
• Use with the AC wall charger:
1 hour before first use
2 hours (100% charge)
• Do not use headset while charging
VOLUME BUTTONS
• Volume presets (1 tap per level change)
LED
• Charging (solid red)
• Low battery (3 red flashes at powering on)
• Pairing mode (repeating red/blue flashes)
CALL BUTTON
• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone’s voice-dialing
(2-second press until tone is heard)
• Reconnect lost Bluetooth connection
(1 tap if the headset doesn’t automatically
reconnect)
• Activate pairing mode after initial set up
(press until red/blue LED flashes)
• Activate multipoint (2-second press
while switching on power)
POWER SWITCH
• On (slide to reveal black)
• Off (slide to reveal red)
PLT_M50
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of
introducing your headset to your
phone. Before using your headset
for the first time, you must pair it
with your Bluetooth-enabled phone.
“Multipoint” lets you pair this
headset with two phones so you
can answer a call from either phone.
You must activate multipoint before
pairing second phone.
1. READY
First Time, Right Out of the Box:
Turn on the headset. The LED
flashes red/blue to indicate
pairing mode.
Activate Multipoint (for 2nd phone):
While pressing Call button, turn
on the headset and continue
pressing Call button until LED
flashes blue twice. Repeat to turn
off multipoint.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
blue.
2. SET
Activate the Bluetooth feature
on your phone, then get phone
to add / search / discover new
Bluetooth devices.
Phones Have Different Menus to
Select from, for example:
iPhone: Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On >
Search for devices
Android™:
Settings > Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_M20” or “PLT_M50” from
the list of Bluetooth devices shown
on your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.
Produktspezifikationen
| Marke: | Edifier |
| Kategorie: | Lautsprecher |
| Modell: | M20 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Edifier M20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Edifier
11 Juni 2025
4 Oktober 2024
3 Oktober 2024
29 September 2024
28 September 2024
9 September 2024
5 September 2024
3 September 2024
2 September 2024
29 August 2024
Bedienungsanleitung Lautsprecher
- Stabo
- Oppo
- HEDD
- Valore
- LD Systems
- Sangean
- Hammond
- FoneStar
- Strong
- Hercules
- Yamaha
- Bowers And Wilkins
- MarQuant
- Belkin
- Clatronic
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025