Edifier NeoDots Bedienungsanleitung
Seiten 7 Ohrhörer
Lies die Bedienungsanleitung für Edifier NeoDots kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 18 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
EN 1. Power ON/OFF
2. First pairing
3. Pairing for new device
6. Charging
7. Controls
Manual
5. Reset
Input: 5V 200mA(Earbuds) 5V 1A(Charging case)
Note: Make sure the USB po is completely d before charging.
Note:
1. Default sound control: High noise cancellation / Ambient sound /
Noise cancellation o.
2. Download EDIFIER ConneX App for more customizable control
settings.
Open or close the case to power on/o.
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER NeoDots" in your device settings to connect.
1. In ON state, press and hold the button on the case for about 3s.
2. Select "EDIFIER NeoDots" in your device settings to connect.
Note: For subsequent use, the earbuds will automatically connect to
the device used last time.
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, orange LED blinks until the
reset is complete.
NeoDots
True Wireless Earbuds with Active Noise Cancellation
EDIFIER NeoDots
Bluetooth
4. Multipoint connection
1. Pair device A with the earbuds manually and keep the earbuds in
the case;
2. Re-enter Bluetooth pairing mode and select "EDIFIER NeoDots" in
device B settings to connect.
3. Select "EDIFIER NeoDots" again in device A settings to connect.
Note: For subsequent use, the earbuds will automatically reconnect
to the two devices used last time.
x3
Press AreaPress AreaPress AreaPress Area
x1
x2
x1
x2
x1
x1
Call
x1x1
x2x2
x3x3
2s2s
Music
>33%
<33%
>33%
<33%
EDIFIER NeoDots
Bluetooth
3s
3s
EDIFIER NeoDots
Bluetooth
EDIFIER NeoDots
Bluetooth
ABA
13
2
Produktspezifikationen
| Marke: | Edifier |
| Kategorie: | Ohrhörer |
| Modell: | NeoDots |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Edifier NeoDots benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten