Edimax IGS-5408P Bedienungsanleitung
Lies die bedienungsanleitung für Edimax IGS-5408P (145 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Edimax IGS-5408P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/145

IGS-5408P
User Manual
01-2019 / v1.0

FCC Warning
This Equipment has been tested and found to comply with the limits for a Class-A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. It may cause harmful interference to radio communications if the equipment is not
installed and used in accordance with the instructions. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
I-1 Reorient or relocate the receiving antenna.
II-1 Increase the separation between the equipment and receiver.
III-1 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
IV-1 Consult the dealer or an experienced radio/TV technician for help.
Produktspezifikationen
Marke: | Edimax |
Kategorie: | Schalter |
Modell: | IGS-5408P |
Upgradefähige Firmware: | Ja |
Breite: | 145 mm |
Tiefe: | 72.2 mm |
Gewicht: | 750 g |
Produktfarbe: | Schwarz |
Internationale Schutzart (IP-Code): | IP30 |
Höhe: | 113 mm |
Energieschutzeigenschaften: | Overload, Reverse polarity |
DC input Spannung: | 48 - 57 V |
Anzahl USB 2.0 Anschlüsse: | 1 |
Betriebstemperatur: | -40 - 75 °C |
Relative Luftfeuchtigkeit in Betrieb: | 10 - 95 % |
Netzstandard: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Unterstützte Sicherheitsalgorithmen: | SNMP, SNMPv3, SSH-2, SSL/TLS |
Quality of Service (QoS) Support: | Ja |
Zertifizierung: | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8; RoHS; FCC 15 B A, CE EN 55032 A; IEC60068-2-6; IEC60068-2-27; IEC60068-2-32 |
Power over Ethernet (PoE): | Ja |
Warentarifnummer (HS): | 85176990 |
Stromverbrauch (max.): | 18.24 W |
Gehäusematerial: | Aluminium |
LED-Anzeigen: | Activity, Link, Power |
Temperaturbereich bei Lagerung: | -40 - 80 °C |
Luftfeuchtigkeit bei Lagerung: | 10 - 90 % |
Switch-Typ: | Managed |
Anzahl der basisschaltenden RJ-45 Ethernet Ports: | 8 |
Basic Switching RJ-45 Ethernet Ports-Typ: | Gigabit Ethernet (10/100/1000) |
Konsolen-Port: | RJ-45 |
10G-Unterstützung: | Nein |
Kupfer Ethernet Verkabelungstechnologie: | 10BASE-T, 100BASE-TX, 1000BASE-T |
MAC-Adressentabelle: | 16000 Eintragungen |
Routing-/Switching-Kapazität: | 24 Gbit/s |
Jumbo Frames Unterstützung: | Ja |
Multicast Unterstützung: | Ja |
Port-Spiegelung: | Ja |
Link Aggregation: | Ja |
Spannbaum-Protokoll: | Ja |
VLAN-Unterstützung: | Ja |
Anzahl der VLANs: | 4096 |
DHCP-Funktionen: | DHCP server, DHCP relay, DHCP client |
Mittlere Betriebsdauer zwischen Ausfällen (MTBF): | 100000 h |
Reset-Knopf: | Ja |
Virtuelle LAN-Funktionen: | Tagged VLAN, Port-based VLAN |
Unterstützung Datenflusssteuerung: | Ja |
Broadcast-Sturmkontrolle: | Ja |
Transferrate: | 17.856 Mpps |
Jumbo-Frames: | 16000 |
Passwortschutz: | Ja |
Menge SFP-Modul-Steckplätze: | 4 |
Gesamtleistung Power over Ethernet (PoE): | 240 W |
Zugriffkontrollliste: | Ja |
Elektromagnetische Verträglichkeit: | 61000-6-2, 61000-6-4 |
Optischer Kabelverbinder: | SFP |
Power over Ethernet (PoE) Leistung pro Anschluss: | 30 W |
Ethernet-Kabel Verkablungstechnologie: | 1000BASE‑LX, 1000BASE‑SX |
DIN-Schienen-Montage: | Ja |
Paketweiterleitungsrate (1 Gbit/s): | 1488000 pps |
Warteschleifenplanungs-Algorithmen: | SP, SPQ, WRR+SP, Weighted Round Robin (WRR) |
Paketweiterleitungsrate (100 Mbit/s): | 148800 pps |
Paketweiterleitungsrate (10 Mbit/s): | 14880 pps |
Relais Output: | 1 |
IPv4 & IPv6-Funktionen: | Dual stack IPv4/IPv6 |
Telnet: | Ja |
IGMP-Snooping: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Edimax IGS-5408P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter Edimax
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
26 Juli 2025
23 Juli 2025
10 Juli 2025
Bedienungsanleitung Schalter
- Krone
- Avocent
- Ubiquiti
- CYP
- Cudy
- Techly
- Chacon
- StarTech.com
- Grandstream
- Blustream
- Quigg
- Cisco
- Ubiquiti Networks
- CyberPower
- Tripp Lite
Neueste Bedienungsanleitung für -Kategorien-
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025