EFB Elektronik E-20070 Bedienungsanleitung
Seiten 1 Nicht kategorisiert
Lies die Bedienungsanleitung für EFB Elektronik E-20070 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

22mm
Front
Back
160mm
6mm
18mm
90mm
EFB-Elektronik GmbH
Striegauer Str. 1 33719 Bielefeld
Made In China
9903346
1 Stück
RJ45 Keystone STP
Class E
A
10GBit
Complies with IEC60603-7-51
RJ45 Keystone STP, Cat.6A, 500MHz,
Komponenten zertifiziert
E-20070
White/Orange
Orange
White/Green
Green
White/Green
Green
Blue
White/Blue
Blue
White/Blue
White/Brown
Brown
White/Orange
Orange
White/Brown
Brown
JACK PIN
DESIGNATIONS
1
2
3
6
4
5
7
8
TIA / EIA
T568B
TIA / EIA
T568A
Insert a cable into the termination cap and
fan out all four twisted pairs.
Following the instruction of the color-coded
wire position printed on the termination cap,
position conductors into the slots and make
sure the conductors are in the proper slot.
Trim the ends of the conductors
1
Strip off 1.2 inch of a cable jacket and fold
braid back over it. Cut off aluminum foil for
each pair, and use a supplied copper foil
shield surrounding a cable.
1.2"(30mm)
Copper foil
Install the termination cap to outlet, which
will also allocate the conductors sitting on
the slots.
Secure the hinged outlet by using
a crimp tool until it completely
snap to effect the connection.
Fasten a cable tie wrap to secure
the cable fixture place
Cable Fixture Place
2
3
4
5
Cable Tie
(Black)(Gray)
>ø1.1mm(22AWG)<ø1.1mm(2-2AWG)-24AWG46
Produktspezifikationen
| Marke: | EFB Elektronik |
| Kategorie: | Nicht kategorisiert |
| Modell: | E-20070 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EFB Elektronik E-20070 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten