Electro Harmonix 2X12 Speaker Cabinet Bedienungsanleitung


Seiten 2 Engels Nicht kategorisiert

Lies die Bedienungsanleitung für Electro Harmonix 2X12 Speaker Cabinet kostenlos online oder lade das PDF herunter. 21 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

1
2X12 SPEAKER CABINET
The perfect companion for your MIG-50, the 16Ω, 60 watt, 2×12 cabinet
delivers big EHX tone in a roadie-friendly rig. It’s also a great extension
cab for your combo or head. Two custom-voiced EHX speakers plus an
angled front, closed back design ensure superior sound dispersion.
Recessed handles and reinforced corners round out this rugged package.
SPECIFICATIONS
▪Two 12" EHX 12TS8 30W 8Ω Speakers
▪60 Watts
▪16 Ohms (Mono)
▪Angled Front, Closed Back
▪¼" Input, ¼" Parallel Output
▪Cabinet material: ¾” Poplar plywood
▪Baffle material: Poplar plywood
▪Speakers: Rear Loaded
▪Recessed Handles and Reinforced Corners
▪Black Vinyl & Grill Cloth with White Piping
GETTING STARTED
1.Connect the 2X12 Cabinet to the 16Ω output of your amplifier using a proper
speaker cable.
2.Apply power to your amplifier.
3.ROCK & ROLL!
REAR PANEL
Parallel Phone Jacks – the rear panel contains two phone jacks which are
connected in parallel. Plug the loudspeaker output of your amplifier to either phone
jack on the cabinet. Please note: only connect ONE AMPLIFIER to the 2×12
Cabinet at a time.
If you would like to connect another cabinet in parallel to the 2×12 Cabinet,
connect it to the other phone jack. When connecting cabinets in parallel, the total
impedance seen by the amplifier decreases. Use the following formula to
determine the total impedance (Z
total
):
Z
total
= (Z
1 *
Z
2
) / ( Z
1
+ Z
2
)

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Nicht kategorisiert
Modell: 2X12 Speaker Cabinet

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix 2X12 Speaker Cabinet benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten