Electro Harmonix Bad Stone Bedienungsanleitung

Lies die bedienungsanleitung für Electro Harmonix Bad Stone (20 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 52 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu Electro Harmonix Bad Stone oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

BAD STONE

Congratulations on your purchase of the Bad Stonereincarnation of the highly sought , a

after Electro-Harmonix classic from the ‘70s,now in a nano package.The Bad Stone is a

six stage phase shifter with variable rate, feedback, and a manual shift control that allows

you freeze the phase and create new sonic landscapes. True bypass switching ensures to

your tone won’t be colored when the pedal is bypassed.

CONTROLS

RATE Knob –Controls the speed by setting the frequency of the Bad Stone’s modulation

internal low frequency oscillator (LFO). The speed ranges from 0.05Hz to 32Hz. (Note:

The original Bad Stone’s LFO frequency range was 0.2Hz to 32Hz. We felt that altering the

original design to allow for slower phasing, thus making this pedal not a 100% true

reissue, made for a better overall productThis control is disabled when the .)

AUTO/MANUAL toggle switch is set to MANUAL mode.

FEEDBACK Knob Controls the amount of signal fed back from the output of the phase –

shifter circuit into the input of the phase shifter circuit. As you turn the feedback control

up, the phase shift effect will sound more pronounced and even sound resonant or peaky “ ”

at high settings.

MANUAL SHIFT Knob Sweeps through the phase creating a sort of –shifter’s range,

“cocked wah” sound. For maximum effect, make sure the FEEDBACK knob is in its full CW

position. This knob is only active when the AUTO/MANUAL toggle switch is set to MANUAL

mode.

AUTO/MANUAL Switch –In AUTO mode the Bad Stone’s LFO modulates the phase

shifter. In MANUAL mode the LFO is disconnected and the MANUAL SHIFT knob sweeps

through the full range of the phase shifter.

INPUT Jack –This ¼” jack is the audio input of the Bad Stone. The input impedance is

95kΩ.

AMP Jack e audio output of the Bad Stone. The output impedance is –This ¼” jack is th

4.7k Ω.

9V Power Jack– The Bad Stone operates with a standard 9V battery or an optional 9VDC

AC Adaptor capable of delivering at least 25mA to the 9V power jack, such as the

EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be

left in or taken out when using an AC Adapto The Bad Stone has a current draw of mA r.18

at 9VDC.

CHANGING THE BATTERY

To change the 9V battery, you must remove the 4 screws on the bottom of thBad Stone.e

Once the screws are removed, you can take the bottom plate and change the battery. off

Please do not touch the circuit board while the bottom plate is off for risk damaging a of

component.

Produktspezifikationen