Electro Harmonix Nano Bass Big Muff Pi Bedienungsanleitung

Lies die bedienungsanleitung für Electro Harmonix Nano Bass Big Muff Pi (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5 Bewertungen. Hast du eine Frage zu Electro Harmonix Nano Bass Big Muff Pi oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

NANO BASS G MUFF BIPI

Congratulations! You have just purchased the finest harmonic distortion-

sustain device for the electric bass guitar player, now in a smaller enclosure:

the Nano Bass Big Muff! Please review this manual to learn the unique

potential of this pedal.

The Nano Bass Big Muff draws its roots from the legendary Sovtek battle-

tank green Big Muff Pi manufactured in the as well as from the original ‘90s

Electro-Harmonix Big Muff Pi from the early 70s. These Big Muffs are often ‘

employed by bass players to thicken up their sound or to give them over-

the-top low end growl. The Nano Bass Big Muff takes the best characteristics

from both of these classics and employs sonic elements that were specifically

designed for your bass.

-OPERATING INSTRUCTIONS-

SUSTAIKnob N — adjusts the amount of sustain and distortion.

TONE Knob — provides a range of sounds from high treble to deep bass. As

you turn the knob clockwise, treble increases and bass decreases.

VOL Knob —sets the output level of the distortion effect. When the toggle

switch is set to DRY, the volume knob has no effect on the output level of

the dry signal.

DRY Toggle Switch —when set to DRY mode, the original dry signal

present at the input jack is mixed with the output of the distortion circuit.

The level of the Dry signal is constant and will not change as you turn the

Volume knob up or down allowing you to set the level of the distortion effect

against your dry signal. Flip the DRY switch to the left, away from the DRY

label, to mute the dry signal; now you will hear only Big Muff distortion.

Footswitch & Status LED —When the LED is lit, the Nano Bass Big Muff

effect is active. When the LED is off, the Nano Bass Big Muff is in True

Bypass mode. The Footswitch toggles between effect and bypass modes.

Produktspezifikationen