Electro Harmonix Tube EQ Bedienungsanleitung
Electro Harmonix
Nicht kategorisiert
Tube EQ
Lies die bedienungsanleitung für Electro Harmonix Tube EQ (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Electro Harmonix Tube EQ oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
TUBE EQ
Vacuum Tube Filter
Congratulations on your purchase of the Tube EQ vacuum tube filter. This uniquely
powerful tool is designed to enhance your music and expand the range of your
existing equipment. The Tube EQ is used differently than most standard equalizer or
tone control circuits, so please take a few minutes to familiarize yourself with the
Tube EQ's controls and how they work.
Your unit comes equipped with a 12 Volt/1 Amp AC external power adapter.
Use
only the power adapter supplied
, and make sure it is appropriate to your location
(USA, Europe, Japan, Australia). Using the wrong adapter can cause damage to the
unit or to you! Use of the wrong adapter will void the warranty.
The Tube EQ consists of two (2) filter sections that are summed together to create
an endless range of tonal possibilities. A passive "shelving" type "tone stack" with
Bass and Treble controls is combined with an active "parametric" bandpass filter with
its own gain, frequency and "Q" controls. Turning the BASS, TREBLE or BANDPASS
GAIN controls clockwise (CW), increases the level of each respective range. Keeping
each control at maximum counter-clockwise (CCW), or OFF, attenuates the input
signal by about 20 dBs.
TREBLE –
Determines the high frequency content of the filter.
BASS –
Determines the low frequency content of the filter.
FREQUENCY –
Determines the center frequency of the bandpass filter.
BANDPASS GAIN –
Determines the level of the bandpass filter.
Q –
Determines the width and resonance of the bandpass filter.
In addition to the input and output jacks at the front of the unit, there is also an
insert for an expression pedal. When this is used, the pedal will control the frequency
center of the bandpass filter only. This produces nice "wah" like effects and more. It
is also recommended that you try this first without using the BASS or TREBLE
controls at all. Leave them OFF.
The FREQUENCY control must be set to the maximum clockwise setting to get the full
range of the pedal. The FREQUENCY control can then be used as a range trim with
the expression pedal to make a fine adjustment to the range of the pedal sweep.
Turning the FREQUENCY knob counter-clockwise with the pedal plugged in has the
effect of both reducing the range and lowering the frequency center of the bandpass filter.
If the FREQUENCY knob is turned all the way counter-clockwise, the pedal will not do
anything.
In addition to an expression pedal, a DC control voltage (CV) can be inserted to allow
remote sweeping of the frequency control. The range of this input is 0 - 5.0VDC.
Make sure all controls are set at minimum (fully CCW). Connect your instrument to the
input jack and your amp to the output jack. The unit's power LED should be lit.
Set the BASS and TREBLE controls to halfway between minimum and maximum. Test your
instrument's sound in both bypass and effect. You should hear a big difference in the
frequency extremes.
Turn OFF both the BASS and TREBLE controls (fully CCW).
Set the FREQUENCY control to halfway between minimum and maximum. Set the Q control
to halfway between minimum and maximum. Set the BANDPASS GAIN control to halfway
between minimum and maximum.
Test your instrument in both bypass and effect. You should hear a big difference in the
midrange. Turn the FREQUENCY knob back and forth to get a feel for how much range the
bandpass filter has. Turn the Q knob OFF and repeat the last step. Carefully turn the Q
control ¾ (CW) the way up. You will hear the resonance sharply increase. Turning the Q
control all the way up may and probably will cause oscillation. In some cases, this will find
excellent uses in electronic music. For guitar and bass, this will most likely provide more
than needed. Get a sense of the useful range for your instrument.
Try combining the BASS and TREBLE with different mixes of the BANDPASS
GAIN/FREQUENCY/Q to get subtle or extreme tone changes to the bypassed sound. With a
little practice, many different kinds of shaping can be simply accomplished. It is often the
case that a gentle use of the BANDPASS GAIN knob gives the best results when mixed with
the BASS and TREBLE knobs.
Remember
to turn the BASS and TREBLE OFF when using an expression pedal or control
voltage (CV).
As always, experiment to achieve your own unique sounds. When used properly, the TUBE
EQ will provide a lifetime of musical pleasure!
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
info@ehx.com or +1- - -8300. USA and Canadian customers: please obtain a 718 937
Return Authorization Number (RA#) from EHX Customer Service before returning
your product. Include with your returned unit: a written description of the problem
as well as your name, address, telephone number, e-mail address, and RA#; and a
copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO- RMONIX UK HA
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the product
was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
Produktspezifikationen
| Marke: | Electro Harmonix |
| Kategorie: | Nicht kategorisiert |
| Modell: | Tube EQ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Electro Harmonix Tube EQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Electro Harmonix
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
3 September 2024
Electro Harmonix Germanium 4 Big Muff Pi Bedienungsanleitung
3 September 2024
3 September 2024
Electro Harmonix Deluxe Memory Man 550-TT Bedienungsanleitung
3 September 2024
28 August 2024
Bedienungsanleitung Nicht kategorisiert
- Aim TTi
- Brita
- Laser
- Amplicom
- Lindell Audio
- Albert Heijn
- Tower
- Zennio
- Ambiano
- GP
- DIEZEL
- Cool Maker
- Huntleigh
- Lowrance
- Crock-Pot
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025