Electro-Voice MB200 Bedienungsanleitung

Lies die bedienungsanleitung für Electro-Voice MB200 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Electro-Voice MB200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

# of Enclosures# of Kits Req’d

in Array:Mb200 Mb300

22 1

33 2

44 3

55 4

6 (complete circle)66

Description

The Mb200 installation kit consists of a

U-bracket, two M8 x 1.25 hex-head bolts,

four lock washers, two friction pads, and two

3/8-24 hex-head bolts (see Chart 1). The kit

is designed to accommodate the System

200TM installation in a variety of ways.

Wall or Ceiling Mounting:

The robust design of the Mb200 installation

bracket allows the System 200TMspeakers

to be mounted in almost any position to ob-

tain the desired sound coverage (see Figure

3).

Flying Installations

The Mb200 bracket “captures” the speaker

in a rigid frame which has structurally sound

locations for attaching rigging hardware.

These attachment points are four 12.7-mm

(1/2-in.) diameter holes located on the ends

of the bracket. A 3/8-in. “quick link” (or simi-

lar hardware) can be readily connected to

each attachment point.

System 200TM speakers can be flown indi-

vidually in either a horizontal or vertical po-

sition, or two speakers can be flown together

in a vertical position (see Figures 4 and 5).

System 200TM Horizontal Arrays

Arrays of two to six speakers are securely

supported in a frame comprised of Mb200

and Mb300 brackets. To create a horizontal

array, two Mb200 brackets are simply locked

into the correct alignment position using the

brackets from the Mb300 Horizontal Array

Mb200

And Mb200W

Installation Kit

•Mounting kit for SystemTM200

speakers

•May be used in conjuction with

OmniMount® Series 100 support

system1

•Versatile design allows the

speaker to be aimed at any angle

from wall or ceiling

•Provides a rigid frame for flying

one or two speakers

•Creates arrays of two to six speak-

ers when used with the Mb300

Horizontal Array Kit

Kit (see Figure 6). The array is extended by

using one additional Mb200 bracket and one

Mb

300 kit for each additional speaker. To

complete the circle for a six speaker array,

one additional Mb300 kit is required. Please

refer to Chart 2 to select the exact number of

each kit needed, based on desired array size.

(Note: refer to Mb300 Horizontal Array Kit

engineering data sheet for detailed instruc-

tions on System 200TM horizontal array con-

struction using Mb200 Installation and

Mb

300 Horizontal Array Kits.)

ItemDescriptionQuanityPart Number

A Bracket171914

BM8 x 1.25 hex head bolt263310

C5/16 split ring lock washer238144

D3/8-24 hex head bolt263311

E3/8 split ring lock washer238834

FFriction washer238829

CHART 2:Kit Requirements for

System 200TM Horizontal

Array Construction

CHART 1: Mb200 Installation Kit Parts List

Produktspezifikationen