Eliminator Lighting Stealth Wash Zoom Bedienungsanleitung

Lies die bedienungsanleitung für Eliminator Lighting Stealth Wash Zoom (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 70 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 35.5 Bewertungen. Hast du eine Frage zu Eliminator Lighting Stealth Wash Zoom oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

STEALTH WASH

ZOOM

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

The Stealth Wash Zoom is a unique DMX intelligent moving head unit. The Stealth Wash Zoom has

3 operating modes; sound active mode, show mode, or controlled via DMX controller. The Stealth

Wash Zoom has 2 DMX Channel modes; 5 or 16 channels. The unit can be run as a stand alone unit

or in a Master/Slave set up. This unit has been tested and there is no assembly required. Follow the

instructions on the following pages to operate your fixture. To enhance the beams effects you can

use a fog machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Stealth Wash Zoom

Supply Voltage: 100V-240V 50/60Hz

LED: 7 x 12W RGBW LED’s

Weight: 10lbs./ 4.5 kgs.

Size: 6.22” (L) x 9.4” (W) x 12.63” (H)

Fuse: 2 Amp

Power Consumption: 95W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 2 DMX Channel Modes:

5 Channel Mode &

16 Channel Mode

Colors: RGBW

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement: Locate and remove

the unit’s power cord. Once the cord

has been removed, the fuse holder is

located inside the power socket. Insert

a flat-head screw driver into the fuse

holder and gently pry out the holder.

Remove the bad fuse and replace with

a new one. The fuse holder has a built-in

second holder for a spare fuse.

Produktspezifikationen