Emerson ER-BT200 Bedienungsanleitung

Lies die bedienungsanleitung für Emerson ER-BT200 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 51 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Emerson ER-BT200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Portable Dual Alarm Clock With FM

Radio, Bluetooth Speaker, 12 Watt

Stereo, USB Charge In, Hands-free

Calling & Dimmer / LED Decor

Visit our website at www.emersonradio.com

ER-BT200

■

■

IMPORTANT SAFETY INSTRUCTIONS

1.) d these instructions. Kp these instructions. Follow all instructions. d all warnings. ReaeeHee

3.) Cln only with dry cloth.ea

4.) Do not block any ventilation ningsInstall in accornce with the manufacturer's instructions.ope. da

5.) Do not instl ar any at sources such as radiators, at registers, stoves, or other aratus alneheheapp

(including amplifiers) that pruce hod

- Do not use this arappatus ar water.ne

- Never remove the casing of this product

- Never lubricate any part of this product

eat.

2.)

6.) Only use attachments accessories specified by the manufacturer. /

7.) Refer all servicing to ified service .Servicing is ruired wn thequalpersonneleqheapparatus has

beeagen damd in any way, such as liquid has en spled or objects have fallen into the beil

appappbeearatus, the aratus has n exposed to rain or moisture, es not erate normally, or has doop

8.) Use only with the cart, std, trid, bracket,anpo or table specified by the manufacturer,

or sold with the aratus. Wn a cart is used, use caution when movg the apphein

cart/aratus combination to avoid injury from tip-over. app

9.) The aratus shall not be exposed to dripping or splashing d that no objects filled with liquids,appan

such as vases, shall be placed on aratus. app

10.) Batteries (battery pack or batteries installed) shall not be exposed to excessive at such as he

sunshinefire or the like. ,

1

WARNING

beeoppen drd.

•

Avoid instaing this unit in places exposed to direct sunlight or close to heat radiating appliances ll

such as electric heaters, on top of other stereo equipment that radiates heat, places lacking

ventilation, dusty areas, places subject to constant vibration and / or humid or moist areas.

•

Operation controls and switches as described in the manual

FCC Informaon

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference l not occur in a particular installation. If this equipment does cause harmful wil

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1)

This device may not cause harmful interference, and

(2)

This device must accept any interference received, including interference that may

cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Thank you for purchasing this Emerson Strg Bass Portable Bluetooth Saker ER-BT200 onpe

If you encounter any problems with the set up or operation of this item, please call the Emerson

Consumer Products Corp., Customer Service Hotline, toll free, at

1-800-898-9020.

Unpking And Set Up ac

•

Remove the unit from the box and remove all packing material from the unit. Save the packing

material, if possible, in case the unit ever needs to be serviced or transported. The original box

and packing material is the only safe way to pack your unit to protect it from damage in transit.

•

Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels

or stickers from the back or bottom othe cabinet. f

•

The serial number on the bottom of your unit and write this number in the space provided on the

Warranty page of this manual.

•

Place your unit on a level surface such as a table, desk or shelf, out of direct sunlight, and away from

sources of excess heat, dirt, dust, moisture, humidity, or vibration.

Protect Your Furniture

Power Source

This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operation

the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid

leaving any marks or stains on your furniture. However certain types of oil based furniture polishes,

wood preservatives, or cleaning sprays may causes the rubber ‘feet’ to soften, and leave marks or a

rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that

you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers

everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the product on fine

wooden furniture.

This product is designed to a t c th a be powered bybuil -in rehargeable baeryhacantt,tt be chargedup wi

DCpowersuppliamicroplug 51V/A y v a USB .

Removehe chargererullycharged t aft f .

3

Preparation For Use

2

Important Notes

FRONT PANEL

5

Location of controls and Indicators

4

Package Contents

ER-BT200 x 1 pc

USB cable for charging x 1 pc

AUX Cable x 1 pc

Ower'ns Manual x 1 pc

TOP PANEL

The unit includes a main switch at back of speaker to save

battery life and prevent inadvertent button activation when in

transit.

Wn in power off, all functions are disabled except the time he

and alarm function. Time and alarm l keep fg even wilunioninct

the display OFF.

1. Connect the micro USB plug to the micro USB charging port at the back of the unit.

2. Connect the standard USB plug end of the cable to a power USB port on a computer, or other USB

charging device, or AC adapter with USB jack (not included). For first time use, approximately 3

hours is required for a full charge.

3. A red indicator s while the unit is charging and it changes to green when unit is fully charged. glow

Note : Battery l last up to 4 hours when connected wirelessly and up to 12 hours when connected wil

through Line-In Audio Jack.

7

Charging the Unit

6

Travel Lock

1. ALARM 1 Indicator

2. ALARM 2 Indicator

3. Slp Me Indicator eeod

4. Bluetooth Indicator

5. AUX Indicator

6. FM / MHz (FM dio) Iicator Rand

7. Micre for dsfreeophonHan

8. AM / PM iicator nd

9. Me (FM, Bluetooth) Button od

Note: Button operation for "Press or Short Press" is to Press the button briefly, and "Long

Press" is to Press and Hold the button for 1-2 seconds.

10. SET / TUNE DOWN / VOLUME DOWN Button

11. PLAY / PAUSE / HANDSFREE

12. SET / TUNE UP / VOLUME UP Button

13. Soze Button no

14. Dimmer / LED Decor Button

15. ALARM 2 Set Button

16. POWER/RESET (On / Off) Button

17. ALARM 1 Set Button

18. Slp Butto een

Switch on t buttons located at the back of unit he two

and at the top of unit to ensure the unit ON. turned

Long press the “M” button until the display “Flashes” Hour

1. Short press tune down or tune up

button to move backward or move forward Hour

2. Short press the “M” button until the display

“Flashes” Minute

3. Short press tune down or tune up

button to move backward or move forward Minute

4. Short press the “M” button to stop “Flashes” after

time set

5. Select 12/24 hour format by short press tune down

or tune up button for selection

Note: To skip manual adjustmen keep it idle for 5 t,

seconds to resume to clock display mode.

Long press and hold for 5 seconds to reset

Adjusting the Wake up times

Press

Press

button to adjust the Wake up time for Alarm 1.

button to adjust the Wake up time for Alarm 2.

Long Press / to set Alarm Time until the display “Flashes” Hour

Short Press tune down or tune up button to move backward or move forward “Hour”

9

Settinghe Alarm t

8

Settinghe Time Manually t

Set Minutes

Short Press / again to set Alarm Time until the display “Flashes” Minutes

Short Press tune down or te up button to move backward or move forward un

“Minutes”

Short Press

Nooundpaernor bolarmishesamete: S tt f th As t .

/ again to finish the Alarm setting

Alarm Clock ON/OFF

Short press to 1 t o1 o. t turnhe Alarmindicaor onorff, Alarm "" will beon orff

to 2 t o2 o. t turnhe Alarmindicaoron orff, Alarm "" willbeon orff

.

Short press

Snooze Alarm

•

Wn the Alarm comes ON, the indicator ofor d real-time Clock Display l blinkheanwil

Note: A th a - yc 2 te se larm will ring gradually wilowhigh volume cles forminus and thenpau

au omaicallyor 10 minuesnonooedurnedtt f t if t sz or t o.ff

•

Press “” button to pause it for 10 minutessnooze

•

To turn off Snooze Alarm mode, short press and then short press again to off Alarm “1” or turn

short press and then short press to off Alarm “2” again turn

Press the POWER button to turn the unit ON

•Enable your Bluetooth device and select

ER-BT200 from its Available / Paired device list. If

pairing successful, the unit l prompt the voice wil

notice “Bluetooth device is connected” and ll wi

become solid.

•Automatic connection with your Bluetooth devices

is possible if they have been paired successfully

with this unit before.

•After paired, you can play your music through this

Bass Boosted Bluetooth Speaker.

•Long Press tune down or te up un

button to adjust volume and it can also be adjusted the volume on connected audio device.

•Short Press to se me siya as . pauorresumuc plaback s wells anweringincoming call

•When t listening, press the button to sho either radio or clock me. noMwitc tod

Or press power button f 1 to turn the unit off. orsecond

Note: If pairing unsuccessful, all previously paired Bluetooth devices around should be disconnected

or turned off first, in order to avoid making any auto reconnection between them. Then, set this unit to

Bluetooth mode, and tap the Bluetooth switch on your phone / device off and back on again to refresh /

search any nearby “” for pairing. ER-BT200

If no Bluetooth device to connect in 3 minutes, automatically switch to Time mode. If you want to

disconnect this unit from your Bluetooth enabled device after pairing successful, short press M

button toh to radio mode. To reconnect this uni just short press button turns to Bluetooth switct,M

me it l automatic connected or select “” again from the Available / Paired device first odwilER-BT200

when the unit in Bluetooth mode.

10

Pairing Bluetooth Speaker

Short press button to select Bluetooth M

mode( flashes for pairing d the it will anun

prompt voice notice " Bluetooth device rdy ea

to ") pair

Press the POWER button to turn ON the unit

and press M button to change to Radio mode

(“FM” and “MHz” On)

1. Short press button to switch to Radio mode M

2. Auto Searching / Scanning FM Stations (Long

press button 2 seconds and release for M

automatically search and save the scanned radio

stations)

Note: Searching l stop at a station with acceptable wil

reception st to memory. fororing

3. Recall Stats fm Memoryionro

•Short Press button, Program number l be wil

shown on the display and switch your stored

program number and listen to your fritestation. avo

•Short press Tune Down or Tune Up

button to st backward or forward 0.1MHZ to f t sch y favte stat. epineune orearouroriion

•Long Press tune down or te up button to adjust volume un

•When t listening, press the button to sho either radio or clock me. noMwitc tod

Or press power button to turn the unit off.

Note: Keep the unit away from other electronic devices to avoid radio interference. For better

reception, adjust the position of the unit.

Press the power button to turn the unit ON

Plug AUX cable in the “AUX” ck at back of unit, another end connects to the computer, ja

headphone or line-out jack of an audio device, automatically enter AUX mode, and AUX indicator

lights ON in solid.

Press the POWER button to turn ON the

unit

•

Selecting 3 t countdown sleep timersprese

by short press and then release, the sleep timer

will start counting down and turn off the unit

when the selected sleep timer elapsed.

S15 stand for 15 minutes

S30 stand for 30 minutes

S60 stand for 60 minutes

•

To cancel the sleep timer during count down process, repeatedly short press “sleep” button jumped

to S15 > S30 > S60 to OFF (“Zz” indicator disappeared)

13

Sleep Timer

12

Enjoying Audio Source via AUX IN Jack

11

Listening to FM Radio

Short press the SLEEP button to switch

cntn timer("Zz" ON) oudow

The brightness of the clock display can be set at High/ Medium/ Lolevel in standby, Bluetooth, w

Radio and AUX modes with a press of “dimmer” button.

The LED Decor can be set at High/Low/Off by pressing and holding the "dimmer" button for 2

seconds.

Note: The brightness of display l staa wily t the lasseingt ttrighbe oret f power o.ff

WARNING

•Permanent hearing loss may result from long-term exposure to sound at high volumes.

•Use as low a volume as possible.

•Speakers are capable of delivering sounds at loud volumes and high pitched tones. Under certain

circumstances, exposure to such sounds can result in permanent hearing loss damage. The volume

level may vary based on conditions such as the radio you are using and volume settings. Avoid

prolonged use of the speaker at excessive sound pressure levels. Please read the Safety

Guidelines below prior to using the speaker.

•You Can Reduce the Risk of Hearing Damage by Following These Safety Guidelines During the

Use of the Product:

•* Turn the volume control to its lowest level, when connecting the speaker and then

•* Slowly adjust the volume control to a comfortable level.

•* Keep the volume at the lowest level possible;

•* If increased volume is necessary, adjust the volume control slowly; and

•* If you experience discomfort or ringing in your ears, immediately discontinue using the speaker.

•With continued use at a high volume, your ears may become accustomed to the sound level, which

may result in permanent damage to your hearing without any noticeable discomfort.

CAUTION:v o t tRemoalf the buil -in baerinvalidatty eshe warranand ma t ty y derohe produsty t ct.

15

Care a Maintenancend

14

3-Level Dier Control & LED Decor mm

11.) Use of a speaker impair your abity to hear other sounds. Use caution while using your willil

speaker when you are engaging in any activity that requires your full attention.

12.) If you have a pacemaker or other electrical medical devices, you should consult your physician

before using the product.

13.) This package contains small parts that may be hazardous to children and should be kept out of

reach of children at all times. The product is not a toy - never allow children to play with the product.

The bags themselves or the many small parts they contain may cause choking if ingested.

14.) Never try to dismantle the product yourself, or push objects of any kind into the product, as this

may cause short circuits which could result in a fire of electric shock.

15.) None othef components can be replaced or repaired by users. Only authorized dealers or service

centers may open the product. if any parts of your product require replacement for any reason,

including normal wear and tear or breakage, contact your dealer.

16.) Avoid exposing your product to rain, moisture or other liquids to protect against damage to the

product or injury to you.

17.) If the product overheats, if the product has been dropped or damaged, or if the product had

been dropped in a liquid, discontinue use.

18.) Never mount or store the product over any airbag deployment area, as serious injury may result

when an airbag deploys.

19.) Do not use in areas where there are explosive hazards.

20.) Observe all signs and instructions that require an electrical device or RF radio product to be

switched off in designated areas such as hospitals or aircrafts.

21.) Dispose of the product according to local standard and regulations.

BUILT-IN BATTERY CARE:

•Please observe the following if the product contains a battery.

•* Your product is powered by a e battery. The full performance of a new battery is rechargeabl

achieved only after two or three complete charge and discharge cycles.

•* The battery can be charged and discharged hundreds of times ,but l eventually wear out wil

•* Unplug the charger from the electrical plug and the product when not in use. Do not leave a fully

charged battery connected to a charger since overcharging may shorten its fes. lipan

•* If left unused, a fully charged battery l lose its charge over time. wil

•* Leaving the product in hot or cold places, such as in a closed car in the summer and winter

conditions, l reduce the capacity and fesn of the battery. willipa

•* Always try to keep the battery between 0 and 45 (32 and 113). A product with a hot or ℃℃ ℉℉

cold battery may not work temporarily, even when the battery is fully charged. Battery performance

is particularly ,limited in temperatures well below freezing.

BAARNTTERY WING!

•* "Caution"-The battery used in the product may present a risk of fire or chemical burn if mistreated.

•* Unless otherwise specified in the user manual or quick start guide the battery in your product can

not be removed or replaced by the user. Any attempt to do so is risky and may result in damage of

the product. Use of other batteries may present a risk of fire or explosion and the warranty l be wil

terminated.

•* Only recharge your battery according to local regulations. Please recycle when possible.

•* Do not dispose the battery as household waste or in a fire as it may explode.

•* Batteries may explode if damaged.

CHARARNGING WING!

•

* When you disconnect the power cord oa C , grasp and pull the plug, not the cord.f charger f Arommains

•* Never use a charger that is damaged.

•* Do not attempt to disassemble the charger as it may expose you to dangerous electric shock.

Incorrect reassembly can cause electric shock or fire when the product is subsequently used.

•* Avoid charging your speaker in extremely high or low temperatures and do not use the charger

outdoors or in damp areas.

•

UNIT DOESN’T RESPOND (NO POWER)

Make sure unit is completely charged. Check that all connections are correct and properly

plugged in. Make sure your device is properly paired with the ER-BT200

•

RESETTING THE UNIT

If the unit does not respond properly or appears to be “frozen”, slide themainswitch off and back on

again to resehe unit t t.

16

Troubleshooting

Emerson Radio Corp. warrants this product to be free from manufacturing defects in original material,

including original parts, and workmanship under normal home use and conditions (“manufacturing defect”)

for a period of ninety (90) days from date of original purchase in, and if used in the United States. Should

service be necessary under this warranty, Emerson l provide the followilwing at our Return Repair Facity il

provided the manufacturing defect is verified along with the date of purchase:

*Repair service for ninety (90) days from date of original purchase at no charge for labor and

parts.

To Receive Authorization to Return a Defective Item, please contact Emerson Customer Service at

1-800-898-9020 or at http/www.emersonradio.com/service/return-policy. Have your Mel numb:/oder,

Serial Number and dated Proof of Purchase with you when you call.

In the event the product must be returned to Emerson:

*Pack the unit in a well-padded heavy corrugated box. Please insure the item is well padded to avoid

damage while in transit back to our facity. ilIf the item incurs damage, it ll NOT be replaced and wi

the consumer will be responsible for return freight costs to reive their same uniect back.

*Enclose your check or money order payable to Emerson Radio in the amount of $10 to cover return

shipping and handling costs.

*Enclose a note with your name, address, phone number, Return Authorization number and brief

reason for returning the unit.

*Enclose a copy of your proof of purchase (warranty service l not be provided without dated proof of wil

purchase).

*Ship the unit prepaid via UPS or parcel post (SHIP INSURED and obtain a tracking number).

NOTE This warranty does not cover:

(a) Damage to equipment not properly connected to the product.

(b) Cost incurred in the shipping of the product to and from Emerson’s Return Facity. il

(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence or failure to

follow operating instructions (including cleaning instructions) provided with the product.

(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s

manual.

(e) Signal reception problems caused by external antenna or cable systems.

(f) Products not purchased in the United States.

(g) Damage to product if used outside the United States.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PHASER URC

AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PROCT. ANY APPLICABLE DU

IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MEHANTABILITY, ARE LIMITED IN RC

DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING

WITH THE DATE OF ORIGINAL PHASE AT RETAIL AND NO WARRANTIES, WHETHER URC

EXPRESSED OR IMPLIED, SHALL APPLY TO THE PROCT THEREAFTER. EMERSON MAKES NDUO

WARRANTY AS TO THE FITNESS OF THE PROCT FOR ANY PARTICULAR PURPOSE OR USE. DU

THE EXTENT OF EMERSON RADIO CORP’S LIABILITY DER THIS LIMITED WARRANTY IS THE UN

REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL EMERSON RADIO

CORP’S LIABILITY EXCEED THE PHASE PRICE PAID BY THE PHASER OF THE PROCT. URCURCDU

UNDER NO CIRCUMSTANCES SHALL EMERSON RADIO CORP. BE LIABLE FOR ANY LOSS,

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR

IN CONNECTION WITH THE USE OF THIS PROCT. THIS WARRANTY IS VALID ONLY IN THE DU

UNITED STATES OF AMERICA.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. HOWEVER, YOU MAY HAVE OTHER

RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS

17

LIMITED WARRANTY

ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE

RESTRICTIONS MAY NOT APPLY TO YOU.

10-90-1402A

The serial number can be found on the back cabinet. We suggest that you record the serial number of

your unit in the space below for future reference.

Model Number: ER-BT200

Serial Number: _______________________________

Emerson Part No.: ER0 Printed in China BT200-20180922-0

****** S E R V I C E ******

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE

PLEASE CALL:

1-800-898-20 90

FOR CUSTOMER SERVICE, PLEASE E-MAIL TO:

internet@emersonradio.com

OR WRITE TO:

Emerson Radio Corp.

Consumer Affairs Dept.

35 Waterview Blvd

Parsippany, NJ 07054

Long press

M

button to set time

ER-BT200 IM, SIZE:600x280mm/128g/6x2//铜版纸折页 单面 单色印刷

Produktspezifikationen